It sounds great! I mounted an ARC 5 channel amp under the dash, added some 5" speakers replacing the 4x6s and I am totally satisfied with the setup and sound!!!
Subwoofer inside of a Jeep Wrangler rear seat
- Thread starter TerryMason
- Start date
It sounds great! I mounted an ARC 5 channel amp under the dash, added some 5" speakers replacing the 4x6s and I am totally satisfied with the setup and sound!!!
Daddy Stew
New member
Did you use a Marine-grade sub or amp for this?
No, I used the Pioneer TS-SW1041D sub - since it's mounted to the bottom of the seat it doesn't see any rain, or at least it hasn't in the 4 years or so it's been there.
Here's info on my amp:
http://www.jeepz.com/forum/product-reviews/31154-skinny-pedal-jeep-tj-amp-bracket.html
Nice work, that looks sharp!
StevenIvery
New member
I have a boss self-amplified woofer similar to this:
http : / / www . sonicelectroni x . com / item_44123_Boss-BASS1400 . html
Would it be possible to do this project with this?
http : / / www . sonicelectroni x . com / item_44123_Boss-BASS1400 . html
Would it be possible to do this project with this?
With something like that you don't need to build the box. I am not sure if you can mount that in the seat or if it needs to be ventilated. It does not need any ventilation, i think you could just cut the crossbars, remove the foam, and set it in there.
I'd be nervous about mounting an amplifier inside of a block of foam. That amp needs airflow - you would likely burn up the amp, the foam, or both.
Now if you could mount the box such that the amp was exposed on the bottom you'd probably be OK.
dailydriver
New member
Terrymanson, Can you please post sound clips to hear how it sound?
You can get an idea of how it sounds from the initial youtube video. I only have a point and shoot camera, so you really can't get that good a feel for it.
It sounds really nice, but at the end of the day, it's a single 10 inch subwoofer.
dailydriver
New member
Thanks man, I will surely check it out!
AdventureBug
New member
Re: Removing the foam
Subscribed, definitely doing this...been looking for an alternative to the stock location due to size limitations and this is perfect as I hate to lose what little room we have in our TJ's.
Subscribed, definitely doing this...been looking for an alternative to the stock location due to size limitations and this is perfect as I hate to lose what little room we have in our TJ's.
AdventureBug
New member
I've read every post before asking the following question... I see you made 3 holes on bottom of box but only mounted one subwoofer. Are there two others that we cant see or is the 3 holes for a 3 sub demonstration but you were just doing 1 sub?
There was space for two 10" subs, but not three. Take a look at the first couple of posts again (there was a glitch for the forum software, and many photos were missing - it's fixed now). For me, one sub was great.
I'm not really sure what you're asking. All I cut from the seat were the supports and the foam. You shouldn't have to cut any mechanisms.
Uberskier,
I can't remember exactly what size I used (it's been 10 years), however if I was doing it over today, I'd use 5/8. The only downside of this box is that it's very heavy, and the once a year that I remove my back seat is a pain. you'd do well with 5/8 MDF.
I can't remember exactly what size I used (it's been 10 years), however if I was doing it over today, I'd use 5/8. The only downside of this box is that it's very heavy, and the once a year that I remove my back seat is a pain. you'd do well with 5/8 MDF.
Stephen Monclova
New member
Terry will I be able to mount 2 10” subs? Without sacrificing sound quality. I’ve read that enclosures like the one that you’ve done degrade the sound quality. My subs are expensive and want it to perform at its full potential. That’s what’s stopping me from starting this project. Thoughts?
also, I have a 5ch amp. Where would you mount this?
also, I have a 5ch amp. Where would you mount this?
Similar threads
