Jeep CJ and Wrangler YJ Parts

Why Not

New member
UPDATED / Jeep CJ and Wrangler YJ Parts / UPDATED

Here is a list of some of the parts that taking up space in and around my shop. Let me know if you have any questions.


1982 Jeep CJ Parts


1) CJ Renegade hood / $200.00
2) CJ driver fender / SOLD
3) 258 6 cylinder – (I was told that this motor has around 72,000 miles on it. I have started it and it did not smoke, or knock. The oil pressure on start-up was 50 PSI. The radiator was not in the Jeep, so I only ran the motor long enough to get oil pressure and make sure it did not knock. This is a as is motor) - SOLD
4) T-5 5 speed transmission with bell housing - $250.00 ( I was told that it has around 72,000 miles on it, but was not able to drive the Jeep)
5) Dana 300 t-case - $300.00 (I was told that it has around 72,000 miles on it, but was not able to drive the Jeep)
6) Model 20 CJ wide track axles (all stock) - $150.00
7) Complete CJ power steering for a 6 cylinder - SOLD
8) Complete CJ power steering for a 8 cylinder - SOLD
9) CJ tail gate
a. Original tail gate with small dent - $100.00
b. Original tail gate (sand blasted) - SOLD
c. Original tail gate (shows sign of surface rust, but no holes) - SOLD
10) 1984 CJ dash with speedometer - SOLD
11) 1982 CJ cowl (no dents) - $50.00
12) 1978 CJ cowl (no dents) - $50.00
13) CJ mirrors (drivers and passengers)(black) - SOLD
14) Passenger side seat brackets - $35.00 (5 to chose from)
15) SOLD - 3 stock painted CJ spoke wheels - SOLD
16)CJ-7 1981 narrow track axles with 3.73 gears front and rear. The rear axle has 1 piece axle shafts - $300.00


1995 Jeep YJ Parts


1) 95 YJ body tub (No dents or rust and no modification)(dark green in color)(all paper work for getting a title) - SOLD
2) 95 YJ tail gate with tire carrier and brake light - $100.00
3) 95 YJ roll bar pad (Bestop)(tan or brown in color) - $50.00
4) 95 YJ complete carpet kit (tan or brown in color) - SOLD
5) 95 YJ dash parts - $25.00 (for everything or will sell whatever is needed)
6) 95 YJ power brake booster - SOLD
7) 95 YJ complete heater assembly - SOLD
8) 95 YJ complete seat belt assemblies - SOLD
9) 95 YJ rear seat (fold and tumble) - SOLD
10) Passenger side seat bracket - $35.00
11) 92 YJ windshield frame with wiper assemblies - $25.00 (frame is straight, but has a slight twist)
12) YJ rear fender flares - $25.00
13) YJ side body flares/steps - $25.00
14) 1988 YJ fuel take - $50.00

Thanks

Why Not (Chris)
 

Attachments

  • P1090540.JPG
    P1090540.JPG
    272.4 KB · Views: 3,067
  • P1090545.JPG
    P1090545.JPG
    188.7 KB · Views: 786
  • P1090548.JPG
    P1090548.JPG
    229.2 KB · Views: 698
  • P1090539.JPG
    P1090539.JPG
    266 KB · Views: 1,190
  • P1090559.JPG
    P1090559.JPG
    270.1 KB · Views: 1,590
Last edited:

are those the side body fenders that stop at the door and then the step is by itself?

do you have pic? i am interested in finding out about those
 
I can send you some pics from my cell phone. I will need your e-mail address. This is the step below the door and the molded body flare that goes between the front and rear fender flare.

Thanks

Chris
 

Not sure if you sentthem already. I have seen nothing yet so I am just checking

I am resending everything today. For some reason, it was kicked back to me this morning. Let me know if you get the e-mail this time.

Thanks

Why Not (Chris)
 
got the pics. those are the ones i have already, thanks for your time though. i am looking for those bar steps i always see on the 94 and 95 wranglers
 
Here is a list of some of the parts that taking up space in and around my shop. Let me know if you have any questions.


1982 Jeep CJ Parts


1) CJ Renegade hood / $300.00
2) CJ driver fender / $25.00 – no rust showing at this time
3) 258 6 cylinder – (I was told that this motor has around 72,000 miles on it. I have started it and it did not smoke, or knock. The oil pressure on start-up was 50 PSI. The radiator was not in the Jeep, so I only ran the motor long enough to get oil pressure and make sure it did not knock. This is a as is motor) - $500.00
4) T-5 5 speed transmission with bell housing - $450.00 ( I was told that it has around 72,000 miles on it, but was not able to drive the Jeep)
5) Dana 300 t-case - $400.00 (I was told that it has around 72,000 miles on it, but was not able to drive the Jeep)
6) Dana 30 / Model 20 CJ wide track axles (all stock) - $350.00
7) Complete CJ power steering for a 6 cylinder - $150.00
8) Complete CJ power steering for a 8 cylinder - $150.00
9) CJ tail gate
a. Original tail gate with small dent - $100.00
b. Original tail gate (sand blasted) - $125.00
c. Original tail gate (shows sign of surface rust, but no holes) - $75.00
10) 1984 CJ dash with speedometer - $50.00
11) 1982 CJ cowl (no dents) - $50.00
12) 1978 CJ cowl (no dents) - $50.00
13) CJ mirrors (drivers and passengers)(black) - $40.00
14) Passenger side seat brackets - $35.00 (5 to chose from)
15) SOLD - 3 stock painted CJ spoke wheels - SOLD


1995 Jeep YJ Parts


1) 95 YJ body tub (No dents or rust and no modification)(dark green in color)(all paper work for getting a title) - $600.00
2) 95 YJ tail gate with tire carrier and brake light - $150.00
3) 95 YJ roll bar pad (Bestop)(tan or brown in color) - $50.00
4) 95 YJ complete carpet kit (tan or brown in color) - $50.00
5) 95 YJ dash parts - $25.00 (for everything or will sell whatever is needed)
6) 95 YJ power brake booster - $50.00
7) 95 YJ complete heater assembly - $50.00
8) 95 YJ complete seat belt assemblies - $50.00
9) 95 YJ rear seat (fold and tumble) - $200.00 (tan – brown in color)(a small 1” tear on back side of seat)
10) Passenger side seat bracket - $35.00
11) 92 YJ windshield frame with wiper assemblies - $50.00 (frame is straight, but has a slight twist)
12) YJ rear fender flares - $25.00
13) YJ side body flares/steps - $25.00
14) 1988 YJ fuel take - $50.00

Thanks

Why Not (Chris)
Is the rollbar padding for a family bar ?
 

yes, its from a 95 so it is indeed for a family bar
 

The YJ seatbelts.... What color? Front or rear? $50 for all or each? Thanx

I sold the belts a couple of days ago and have gotten the listed updated yet, sorry. I will be updating the list either tonight or tomorrow.

Thanks

Why Not (Chris)
 

I'd be interested in the dash. What's the condition? Can you shoot me a pic?
 
HeyI need the brake caliper holder..it's the bracket and is locate right behind the hub. It holds the brake caliper in..I you could take a picture that would be great. Thanks
 

Why Not said:
Shot me a PM with your e-mail address and I can shot you some pictures. Sorry for the delay, been a little busy with work.

Thanks

Why Not (Chris)

Sent pm. Thanks
 
Hi. I'm looking for a v-belt 2 groove ps pump pulley (1 large, 1 small for an emission pump), like the one in your picture. Do you have one, please?
Thanks,
Frankn your picture. Do you have one, please?
Thanks,
Frank
 
Hi. I'm looking for a v-belt 2 groove ps pump pulley (1 large, 1 small for an emission pump), like the one in your picture. Do you have one, please?
Thanks,
Frankn your picture. Do you have one, please?
Thanks,
Frank

Frank:

I will try and look tomorrow before I leave for the airport. I will be in Vegas all week for SEMA, so it might be the weekend before I get a chance to look at everything I have. I think I do have the pully that you are looking for, but will have to confirm.

Thanks

Why Not (Chris)
 

Hi. I'm looking for a v-belt 2 groove ps pump pulley (1 large, 1 small for an emission pump), like the one in your picture. Do you have one, please?
Thanks,
Frankn your picture. Do you have one, please?
Thanks,
Frank

Frank:
Sorry for the delay, but it was not where I thought it was. Take a look at the picture and let me know if this is the pully that you want. I would take $25.00 shipped to your address if this is pulley you want. Just let me know.

Thanks

Why Not (Chris)
 

Attachments

  • P1090613.JPG
    P1090613.JPG
    146.1 KB · Views: 632
Back
Top