Search results

  1. M

    Going into reverse, or making coffee

    1041077 I would recomend changing your transmission oil, i just recently changed mine in my yj which i dont think was everchanged since 1991 when it was put in there i went with a havoline or valvoline somthing like that durablend formula 85w-90 GL-5 gear oil, it takes 2 1/2 quarts drove it...
  2. M

    Concerned

    1041080 W\ your transmission i would change the gear oil, never go wrong with fresh fluids they say use 75w-90 GL-5 gear oil but i use a 85W-90 GL5 durablend oil sythetic and natural based oils get the best of both worlds, as for your transfercase, i would go ahead and replace the rear seal...
  3. M

    what should i do about tires with 7 inches of lift

    1041437 Got somthing for ya, I have a 91 yj, with 31s and stock gears, when i left from the factory size tires to 31, i should have just thrown fith gear in the shit can, the gears stink on jeeps when you get oversized tires, you will find that if you encounter the slightes, up hill go on...
  4. M

    Tow Hooks on YJ

    1041490 With your tow hooks pull the peice of plastic off your bumper that says jeep keep if you want i didnt, under that you will find you other hole to mount your hook, good luck marc[addsig]
  5. M

    Transmission Movement

    1041492 Did everything you said except the tow strap thing all my mounts are good, and when I blocked the tire with wood in 2 hi i had slight movement i would say maybe 3/4 of an inch and the same in 4 Lo, on the rear drive shaft however on the front in 4 Lo i had maybe half of the movement, I...
  6. M

    exahust smell while driving

    1041705 I dont know with the 4.0 but with the 2.5 my throttle positon swith shit the can overnight for some reason, which cut my gas down from about 13 hwy to 11hwy and it stunk real bad, mostly at idle though, also pull your intake tube off and look down in your throttle boddy with plate...
  7. M

    K&N FIPK for a YJ?

    1045825 even easier cut the 90 degree elbow of your old intake hose go to advance auto by one for a honda civic APC Intimidator 49.99 comes with filter, tube a cool looking hose for your breather put the 90 in the polished aluminum tube use the reducer that comes with the intake for a tighter...
  8. M

    No trackbars

    1049167 Jks makes a telosoping tac bar for the front on yj it is $199 and slides inside of itself when a bolt on a johnny joint is loosend i Have the front one good investment but i cant tell a difference when its loose or not the real big differnce comes when you get rid or disconnet you sway...
  9. M

    Lock for Front Diff. always broken ...

    1049179 I am not sure what you are talking about your discription was very vauge, do you have a cj, yj, or tj if you have a yj the only thing that i can think of that locks would be you shift motor for to engauge your front axle, if so there is a part in quadratec that elemnates the vacume stye...
  10. M

    Strapping down the transfer case?

    1049650 I dont know what year you have or motor size but in my 91 i was getting alot of move ment in my transmision and transfer case so bad that if i was in a bind and had to reverse the shifters would actually hit you in the leg, what i did was make a braket and attacted it to where the...
  11. M

    fuel gauge wacky

    1049676 this is no joke when the level in your tank goes down so does the presure of some like that the vacume or somthing at least that what the guy at the dodge dealer told me and also if you leave your gas cap of you loose gas mileage, he said when there is a woosh when you take of you cap...
  12. M

    I need yall opinon long post but please help

    1049677 its worth a dollar to me, i was thinking the same doesnt the 87 carb six the 258? but they did say they would trade even and give me 300 dollars only becase i got some super kill grill that i found on a trail and welded to my stock bumper marc [addsig]
  13. M

    Loose manifold

    1049680 I dont think your manifold would warp because its a cast design unless it was so far in red zone the gauge broke and you poured ice water on it but then it would just crack, if all else fail instead of having you manifold milled just get a header, they are fairly cheap when you...
  14. M

    fold down the windshield?

    1049686 I thought about it but then again I have a yj and then i would have to take off the front part of my roll cage seems like a lot of work to get hit in the face, I dont think it is very practical but dont some compitions require the glass to be removed or you have to fold it down...
  15. M

    Ok, lets get this straight... NO!!! I SAID STRAIGHT!!!!

    1052045 you have probally already checked this but what about your tire pressure its been real cold lately it may be off enough to mess up your allignment, also if you let go of your wheel does it pull, i know on the tires i have MTR's they wont look low but they will be somthing like 15 psi...
  16. M

    New engines for the wranglers...

    1052047 well you do know that Diamlar Cryslar is part owned by a German Company, I did read that when they were talking about the Rubicon. However they just spen around 1.4 Mill. On there new logo "Only in a Jeep," that shows the classic grill as for the safty thing, I did hear that the doors...
  17. M

    1in body lift

    1052049 I have a 3in body on my 88 talk about a gap I just try for about an hour or so to fill it with mud its real fun and no more gap, when it falls out just repeat also works great on scratches and dents its like the all natural bondo Marc [addsig]
  18. M

    gas milage

    1052075 I with jeeper 89 with my 4 banger 91 and my 88 4.2 wont run long enough to find out, but as for my 4 cylinder, i have a cool air intake, tbs exhauset header on back, and an ignition system and my sucks, I am also running 31 wich isnt much so i have no clue its not running rich doesnt...
  19. M

    Stalling At Idle

    1052078 i have a good guess what you prob is i have an 88 loredo and where the idle screw hits the tempture thing to adust the idle the plastic round thing that hangs off the front of the carb was my prob i took it off since i had to transfer it to the remanufactured one, runs great you will...
  20. M

    holy #%*! it's cold in here

    1052079 I have that same problem i just wish i had a super high for a fan selecton instead of low which might as well be off medium which stinks and Hi that is joke but better than nothing[addsig]
Back
Top