suspension question

[gasonit]

1073113

Its been a while since I posted anything, but the last time I had a question everyone here was helpful. I have a 98 tj. I bought it used and I Figured out that it has a 4" lift. The lift parts do not have any markings, like skyjacker, or anything. My question is in regards to the rear upper control arms. Can my jeep have the factory rear upper control arms with a 4 inch lift? I noticed that the bushing where one of the rear upper control arm connects is just about finished. I would like to replace it. Any help would be greatly appreciated.[addsig]

 

[Bounty__Hunter]

1073115

Very likely the uppers are stock, front and back. Most 4" kits just replace the lowers. If it's stamped u-shaped steel, it's probably stock. Most aftermarket arms are tube steel.[addsig]

 

[gasonit]

1073273

thanks for the information. Apparantly mine are stock. thanks again for your help[addsig]