Really need some help!

[Jet]

RE: what next

The other day while I was driving my 92 Wrangler when it started to vibrate really bad. This happens when ever I get to about 25 mph and never stops. If I push in the clutch while driving the vibration stops. But as soon as I release the clutch the vibrations is back. I had the clutch replaced about three months ago and have had absolutley no problems. I also had a u-joint replaced a few weeks ago. If anyone can help I would appreciate it.

 

[mud4feet]

Did you do the u-joint yourself or have someone else do it? Kinda sounds like a u-joint to me......somethin' in the driveline......I'm sure more help will follow...........

 

[88Wrangles]

I'd check the U-joints on that driveline as soon as possible.

 

[Robrt-Stephens]

The other day while I was driving my 92 Wrangler when it started to vibrate really bad. This happens when ever I get to about 25 mph and never stops. If I push in the clutch while driving the vibration stops. But as soon as I release the clutch the vibrations is back. I had the clutch replaced about three months ago and have had absolutley no problems. I also had a u-joint replaced a few weeks ago. If anyone can help I would appreciate it.

The key to your post is that the vibration stops with clutching.

Cure: it is the throwout bearing and collar but check drivelines first.

Robert

 

[Jet]

Thanks for the replies fellas, I'm going to check the u-joint and Throwout bearing tonight. I'll let you guys know what I find out. And a shop did replace the last u-joint.