Junkyards

[jeeptjon37's]

Ok,
So I've done a little research and but I'm not sure if I'm right.

What vehicle could i pull a LM2 out of?

What vehicle could i pull a dana 44 5 on 4.5 axle out of?
Thats the stock axle numbers, right? (could someone tell me what to call them. I've kind of forgotten! :lol::lol::???: )

What vehicle could I pull a ford 8.8 out of? Same axle numbers.

:cookout::cookout:arty::cookout::cookout:arty::cookout::sawzall:
:sawzall:



Thanks,
Tom

 

[54cj3b]

First off what kind of jeep is it

5 on 4.5 is the lug pattern

what gear ratio are you looking for ?

dana 44 can be found in a wide variety of vehicles most are 5 on 5.5 lug pattern

8.8 commonly in ford explorers

the axle is called a differential

from the sound of your post you have little to none experience , please don't take this the wrong way , but are you ready and able to take on such a big project , if its not done correctly you are going to have more problems than you could ever imagine .
do a lot of research first , ask a lot of questions but please don't bombard the board all in one post it gives every one a chance to help explain what your asking , and before you start this project maybe see if you can find someone local to you that has a little more experience to help you , this will help you in 2 ways teach you as you tackle your project and also give you a extra set of hands

look forward to hear how your project goes and good luck

 

[jeeptjon37's]

First off what kind of jeep is it

5 on 4.5 is the lug pattern

what gear ratio are you looking for ?

dana 44 can be found in a wide variety of vehicles most are 5 on 5.5 lug pattern

8.8 commonly in ford explorers

the axle is called a differential

from the sound of your post you have little to none experience , please don't take this the wrong way , but are you ready and able to take on such a big project , if its not done correctly you are going to have more problems than you could ever imagine .
do a lot of research first , ask a lot of questions but please don't bombard the board all in one post it gives every one a chance to help explain what your asking , and before you start this project maybe see if you can find someone local to you that has a little more experience to help you , this will help you in 2 ways teach you as you tackle your project and also give you a extra set of hands

look forward to hear how your project goes and good luck

Well I'm not building it for a while but I do have some kind of idea of what im doing. First off I'm not putting this on my TJ, ok auto 4x4 is. I've heard of a lug pattern and gear ratio.

Was I really bombarding everything with THREE seperate posts. Bounty hunter told me to seperate posts.

Thanks,
Tom

 

[Gennybro]

You have 3 questions on one post. I believe what bounty hunter was referring to was to post one question to each thread.

 

[54cj3b]

no I didn't say that , Ask one question than let people help answer it for you , than ask the next its easier for us to understand what your asking that way and you'll more than likely get a more straight forward detailed answer , not like this: just remember this is only a example

Were do the lug nuts go , how do I change oil , how much air goes in the tires ect ect ect

that s what is called bombarding

We want to help you with the right information in full detail , rather than jumping Around between questions and answers confusing you me and every one else following this tread

 

[nowajeepman]

:deadhorse::deadhorse:

 

[superj]

Ok,
So I've done a little research and but I'm not sure if I'm right.

What vehicle could i pull a LM2 out of?

What vehicle could i pull a dana 44 5 on 4.5 axle out of?
Thats the stock axle numbers, right? (could someone tell me what to call them. I've kind of forgotten! :lol::lol::???: )

What vehicle could I pull a ford 8.8 out of? Same axle numbers.

:cookout::cookout:arty::cookout::cookout:arty::cookout::sawzall:
:sawzall:



Thanks,
Tom

did you get all the info you were looking for?

 

[jps4jeep]

What vehicle could i pull a LM2 out of

chevrolet passenger cars until 89-97ish

What vehicle could i pull a dana 44 5 on 4.5 axle out of?

87-89 Mj's and Xj's canadian yj's with tow package. maybe some passenger cars from god knows when.

can't think of any other small 5 lug D44 stock.

What vehicle could I pull a ford 8.8 out of? Same axle numbers.

Ford explorer and pass cars like 94+ mustangs, rangers, explorers and various ford licoln and mercury cars (crown vic and mark VII example)

 

[jeeptjon37's]

did you get all the info you were looking for?

Yup I'm good.

 

[Stalefishsk8er]

Ok,
So I've done a little research and but I'm not sure if I'm right.

What vehicle could i pull a LM2 out of?

What vehicle could i pull a dana 44 5 on 4.5 axle out of?
Thats the stock axle numbers, right? (could someone tell me what to call them. I've kind of forgotten! :lol::lol::???: )

What vehicle could I pull a ford 8.8 out of? Same axle numbers.

:cookout::cookout:arty::cookout::cookout:arty::cookout::sawzall:
:sawzall:

Thanks,
Tom

Just go to the vehicles and identify the axles and whatever the lm2 is

 

[robo83]

got my 8.8 out of a '97 explorer