Search results

Mikey, Wlecome back, long time no type! I am in the process of taking out my stock YJ dash and replacing it with a simple sheet of aluminum. for the ignition I am using a 12 volt guy switch pannel, I have a tach, water, oil, and volt gauges, relocatged factory heat control and thats all. I...

Thats a FC 150, FC 170 would have 8 lug wheels

Aussie makes the best lunch box locker out there.

Aussie is, in my opinion, the best lunch box locker. Put one in both axles.

Smartest thing you could do. I've owned a lot of carbed jeeps, the best running set up I ever had was a offenhouser (spelled wrong, I know) 4 bbl intake with a holley truck avenger470 cfm carb. It is a pricey set up, heck the cost is up near what a EFI system might be. After initial tunning...

Sounds like your low on coollant. Just guessing you have a 4.0 in your YJ, you want it to be around 210F

That sucks, I just tossed my old stock fenders from my 94, the exteriors were beat to crap, but the inner fenders were cherry. They sat in my shed for the past 4 years.

Re: 73 jeep rebuild 10 soa kit look for a cherokee front drive shaft in the junk yard, you can shorten it and run it in the rear of your CJ

New Cam= New Springs, Everytime

Re: 73 jeep rebuild 10 soa kit What is up with the drag link? That was a kit? Someone actualy sells this? I would highly suggest buying a steering kit from Ruff Stuff, they are having a 15% discount right now on them. "Y" Link Steering using GM 1 Ton TRE - RuffStuff Specialties Should look...

All depends on how far away from the production date you get. I see more CJ8's than I do CJ6, but jeep made twice as many CJ6 as it did CJ8's. That said Jeep made a total of 50,172 CJ6's over a 26 year production run (american distribution only) Jeep made a total of 27,792 CJ8's over a 5 year...

OMG, not cracks in the paint. Honestly, having to deal with Chrysler in the past for warranty issues, way easier to just buy new flares and be done. My time is worth way more than a set of flares.

Assuming the springs are in good shape and not all sagged out, they will fit. most 32" tires usually measure closer to 31" which was a stock size tire on several CJ5's

76-95 the seat mounts are all very similar, so interchangability is basically bolt on. also fox body mustang seats will bolt on, you just need to enlarge two holes on the seat bracket.

I used a thero coupler from auto zone, cost about $18 and I just stuck it into the end of the radiator hose at the radiator input. hasn't leaked yet. Compressor Works/Cooling Fan Control (733653) | 1978 Ford F250 3/4 ton P/U 4WD 8 Cylinders H 5.8L 2BLModified OHV | AutoZone.com_ It only turns...

What 69jeepcj stated, the 304 and 360's of the 70's and 80's were a power joke. those motors were totally choked down with smog crap and poor flowing intakes and heads (ironically good flowing exhaust manifolds). If it were me, and it's not so this may be a little excessive. I would search for...

Oh and Bolt on. Silicon is ment for boobies and bath tubs

Covering up the rust with diamond plate or a rocker guard will only make the rust worse and will accelerate the rot. best bet is to get some rockers from JC Whitney, cut out the bad area, replace with good metal, get it solid, not really pretty then put on a rocker guard or cover.

Dropping the price to $100

I threw on out last week. when into the metal dumpster so I could net $.05 for the steel weight.