tire question

[Cj-5_W/4WD]

1040106

I have a '74 Cj5 with Dana 44 rear end, and Dana 30 front end with no lift running 31x10.50's right now, I'm wanting to run Mickey Thompson Baja Belted 35x17.50x15's what kind of backspacing on a 15x 14 rim would I need as well as would fender cutting be required with a 4" suspension lift and 3" body lift. This is mainly a street cruiser, it's my curb krawler, but I'm trying to turn it into a good looking capable machine, I have the 5.0 liter 304 so it has plenty of power, I just need these questions answered if it isn't too much, thanks.

Jeeps will always roam the earth
[addsig]

 

[ryankopecki]

1040117

You won't need to cut the fenders with that much lift. Even with the 304 you'll probably want lower gears with that big of tires.
[addsig]

 

[Cj-5_W/4WD]

1040165

Thanks for the relpy but I need to know what kind of backspacing I would need I figure probably somewhere around 6 inches of backspacing but I'm not sure. If anyone can help me on this I would much apperciate the help
[addsig]