Cherokee pics. Lets see your rig

I'm working on it now... I'm going to put a 8.25 in this weekend and cut my fenders... here is a daytime pick
 

Attachments

  • ForumRunner_20110314_010942.png
    ForumRunner_20110314_010942.png
    378.9 KB · Views: 516
here's her first day home.97 xj,4.0,auto,D30/C 8.25,3" BDS lift..
GEDC03641-1.jpg


out on her first official mud run (lost a fender flare that day..)
GEDC00202-1.jpg


Toys for tots snow run (lost a flare that day also)
PC131386-1.jpg


IMG00194201009171641-1.jpg


rockers were rotted so i had em cut out and 2x5 square tubing welded in place..also a simple C channel front bumper to replace beat up stock..
GEDC0499-1.jpg


GEDC0481-1.jpg


GEDC0495-1.jpg


IMG00168201009111747-1.jpg

i've had about 3 stock flares pop off while on the trails..i did run flare-less for a bit but mounted some TJ flares to pass inspection..currently flare-less again..
 
Last edited:

Nice. Ya I wanna try some rustys flares. Fit 35s with my 5.5 inches lift
 
A few pics off in the woods after shooting every firearm known to man lol!
 

Attachments

  • image-2886198091.png
    image-2886198091.png
    1.3 MB · Views: 400
  • image-297045482.png
    image-297045482.png
    1.3 MB · Views: 389
  • image-3888080664.png
    image-3888080664.png
    1.3 MB · Views: 434
  • image-2599778831.png
    image-2599778831.png
    1.2 MB · Views: 419

Pics,
 

Attachments

  • image-587801325.png
    image-587801325.png
    1.2 MB · Views: 408
  • image-3650234135.png
    image-3650234135.png
    1.2 MB · Views: 430
  • image-2505110851.png
    image-2505110851.png
    1.2 MB · Views: 433
  • image-4135145569.png
    image-4135145569.png
    1.3 MB · Views: 410
Pics
 

Attachments

  • image-3211825518.png
    image-3211825518.png
    1.3 MB · Views: 404
  • image-554276821.png
    image-554276821.png
    1.2 MB · Views: 391
  • image-368992005.png
    image-368992005.png
    1.2 MB · Views: 422
Here's mine.

Current:
'84 XJ
2.8 V6 (is that jealously I hear?)
spooled D44 rear
Aussied and alloyed HPD30 front
4.88's all around
35" MTR's
~2" of lift
A few other mods.

Future:
4.3/700R4/Unknown TC - would like to do a 231/231 doubler but would also like to do front digs? Might just go with cutting brakes and selectable rear locker instead?
Once the 4.3 is in I'll finish the dash and make it street legal.

Pretty happy with the size. If I get new tires I would like to go with some 35" Krawlers and DIY beadlocks. If I want bigger tires I'll probably go full buggy or I'll throw some (serious) tube at a Blazer or TJ.

Build thread here:
FORUM for OffRoadIdaho.com • View topic - My little XJ...


New rims:
100_2893JPG-1.jpg


100_2900JPG-1.jpg


Closeup of boat-sides in action:
Shakedown25-1.jpg


On the trail:
100_2763JPG-1.jpg


A few with the old rims:
IMG_3813JPG-1.jpg


IMG_3671JPG-1.jpg


IMG_3775JPG-1.jpg
 
Last edited:
Here is the latest with the new TSLs. I'm going to do a bit more trimming and cut out the lower rear quarters. Just wanted to see it with the tires on.
 

Attachments

  • jeep 38s.jpeg
    jeep 38s.jpeg
    73.3 KB · Views: 1,175

Just picked this 97 sport up today with a 3 inch lift and 31s for $600 ....
 

Attachments

  • ForumRunner_20110417_003635.png
    ForumRunner_20110417_003635.png
    1.1 MB · Views: 285
  • ForumRunner_20110417_003713.png
    ForumRunner_20110417_003713.png
    1.2 MB · Views: 241
timbekk said:
Just picked this 97 sport up today with a 3 inch lift and 31s for $600 ....

Six hundred bucks?!? That's pretty sweet, man! Nice find, congrats!! I wouldn't mind having a Cherokee at all. Good find. Anything major wrong with it?
 
Small crack in the front windshield and no fender flares... Other than that its a good runnin jeep with 140k for miles... No fluid leaks, knocks, pings, vibration nothing.... I scored lol
 

You sure did. It looks like theres some kind of rust running down the side?
 
Went and did some digging this weekend. Video on you tube to come shortly.
 

Attachments

  • image-3655923641.png
    image-3655923641.png
    1.6 MB · Views: 259
Back
Top