AX-15 ??s

[AZJEEP]

I bought my used '88 Yj and it came with A.T.F. In the AX-15 Manuel transmission.
Is this gonna work out o-k? Anyone else using it, what results? Anyone have advice on good transmission mount/method, to use the existing Yj mount plate? The current setup has a section of the transmission on passenger side that contacts the mount plate with a "clank", whenever I release the clutch under a load. Torque twist will do it also.
The section that hits looks like a second transmission mount itself. Any thoughts are welcome and appreciated ;-)

 

[TLCJ5]

Run Redline MT90 if you want smoother shifting, it improves even cold-weather shifting. Ran this in my the "95 I had a while back & worked great.

Read more: http://www.jeepz.com/forum/cj-yj-tj-jk/38072-94-ax-15-wont-go-5th-gear.html#ixzz2YrOoOO48

​

 

[Bounty__Hunter]

I second the Redline MT90, great stuff.

The torque mount on the transmission should have two rubber bushings, one on each side of the skid plate.

 

[jfrabat]

I also vouch for MT90... My transmission felt like a new one when I made the switch back in 2006. Have not used anythiing else since (except more of it, of course)

 

[AZJEEP]

I second the Redline MT90, great stuff.

The torque mount on the transmission should have two rubber bushings, one on each side of the skid plate.

So the part clanking needs the bushings ok that makes sense. I will look at it and see what it needs to make it work. Thanks bounty!

 

[eric m]

..