4WD indicator light stays on

rbelair

New member
Same jeep,08 Wrangler 4x4 3.7.
After reaching operating temp all... idiot lites come on as far as for four wheel drive system and 4 wheel will not engauge. 4 wheel works before all lites come on.
Senser in trans,transfercase??

Thank you.
Rodney:x
 

Same jeep,08 Wrangler 4x4 3.7.
After reaching operating temp all... idiot lites come on as far as for four wheel drive system and 4 wheel will not engauge. 4 wheel works before all lites come on.
Senser in trans,transfercase??

Thank you.
Rodney:x

Thats why i drive CJ's I have a friend that works at dodge will ask him and get back to you
 

Same jeep,08 Wrangler 4x4 3.7.
After reaching operating temp all... idiot lites come on as far as for four wheel drive system and 4 wheel will not engauge. 4 wheel works before all lites come on.
Senser in trans,transfercase??

Thank you.
Rodney:x

Are you saying that the 4WD indicator light stays on (indicating that you are in 4 wheel drive)?

There is a sensor on the exterior of the transfer case that tells your Wrangler if it's in 4 wheel drive. Make sure that it isn't damaged
 

Attachments

  • tcaseswitch.jpg
    tcaseswitch.jpg
    35.8 KB · Views: 1,213
rick said get it scanned. but he thinks theres a short in a relay


Figured that much but Dodge wants Min. of $100 to scan it and auto stores scaners cant tell me.:???:
Four wheel works fine untill it reaches operating temp. than ALL the 4x4 ind. lights come on and 4x4 no longer works.
 
Back
Top