i have no power from the solenoid to the starter power ok going into the solenoid from battery but comeing out of solenoid no power . checked with a light tester. we"ve replaced solenoid and got the same result, replaced starter new battery new cable Turnned ignition over to start again and nothing happend jeep is totaly dead wont even turn over. need help with this issue.
1987 jeep yj 4.2L wont start
- Thread starter schnelly
- Start date
SteelHeadz
Super Moderator
There are 2 smaller wires on the starter solenoid. One goes to the Ground and the other to the Ignition Relay then the Ignition switch. On Start Position, the wire to the solenoid from the ignition switch should be battery voltage.. If thats good, Check the Ground side of that connector from the solenoid.. Also Check all the Fuses on the fuse block, Particularly, The ignition Fuse..
Similar threads
