Search results

1045286 hell ya its a good enough, i roll 31 which arent big but i can climb as good as my buddys 75 cj5 w/the 258 in it and if you got a 91 then you have real fuel injection instead of that throttle body injected unit put an intake a spacer exhaust on it and hold on not really but it will help...

1045287 try quadratec they sell aluminum valve covers so if they out of stock in your area they might have one dont they have some kind of ploicy if they are out of stock shipping is free or somthing like that? good luck also the valve cover gasket is only 7 dollars and a tube of red RTV is...

1045288 dont know if this helps mine drops down to around 40 at idle thats in the middleish and up to 60 at over 1500 rpms mine does how ever have a million miles like around 155,000 give or take 600 or so. marc[addsig]

1045289 one more thing all of my gauges are in one peice are yours the same, if so can you order one with out getting all of them or do you have to replace the whole strip because mine are rusty, and kinda yellowed, thanks marc[addsig]

1040515 My buddie had the same prob with his 79 cj, we replaced the mounts, and reajusted his linkage, made the prob, go away [addsig]

1040523 manual on a tj, with the four banger[addsig]

1040789 Hey if the tail lights are good let me know and i will make an offer also the tag assembley if over the gas cap is good let me know about that too thanks a million [addsig]

1040791 I mounted my cb antena on my yj on the bump stop for my spare tire i dont have a huge anttena i think its like 6ft i get good reception and for instalation it simple as one for a truck, the perch i used was a u bolt shape, drilled to holes, took me bout 15 including running the wire, i...

1040811 have you tried 4wheel drive hardware they are a lot cheaper than quadratrac on a lot of things including shipping. http://www.4wd.com/index.htm, hope this helps [addsig]

1040812 Can you push start it and works and engages fine? If not its somthing more than you starter, also when you changed your transmission, did you have you fly wheel ground, if so make sure they didnt worp it on the machine, i had the same proplem with a toyota, but when i push started it...

1040858 On your lock, you dont have to push down the buttion to shif gears, thats no big deal, about the distenction between d2 and low shouldnt be any untill it is time to switch gears and then all low will do is keep it in first because you have a 3 speed transmission, so low=1st, D2=2nd...

1040860 Eddie, that was some great info on the oil filter thing, thanks a million [addsig]

1040862 is it just the speakers or is it the speakers and the soundbar both let me know if it is sound bar and we may have a deal [addsig]

1040900 I have/had the same problem on my 91 yj, mine was that in the steering colom the cam that my bliner arm sets in was broke slighty rusted and very loose, it only cost me like 5 dollars from the parts store, check there first i dont know how hard it would be for you since you have a newer...

1040901 also check your hub bearings. could have got some dirt or somthing in there since you shocked it that hard[addsig]

1040956 If you dont want to go to the shop, take you throttle body off and clean the hell out it, i have a 91 with the 4 cyl, and i had the same prob. while you have your throttle body off clean your Idle Air Control, and space it i think 1/8 of an inch to to that push it in all the way and...

1040961 I have no same in my 4 banger its all in the gears and unless your doing time hill climbs, if not then you dont need speed, drop your gears down get a locker, kiss your gas millage, goodbye, be happy and only spend around a 1000 since you have someone with a machine shop then you have...

1040964 I am not real sure i guess its somthing internal because the warrenty covers them, all i know is that they go out slowly over say a few miles or a couple high revs, they loose pressure he stalls pull one out from under his seat shoots his carb full of ether fires it back up and keeps...

1041016 I have a 91 yj, with 31-10.50's Goodyear MTR's with no lift, they rub the rear finder flares at the bottom front side, when i go over bumps and on the front leaf spring the bracket that hold the springs together, put a chalk line on the inside of your tires and turn if it rubs off that...

1041017 Look in 4wd hardware, they have more oem parts than quadratec, if you can get a hold of a magazine its in the back part I orderd all of my duct work for a wranger for around 75.00, including the line that works the valve on your heater core and air box [addsig]