Search results

RE: Good Rock Crawler web vids My brother has an 88 cherokee 4.0 auto. we just swaped in a new motor and now it won't start it will turn over but there is no spark. I started with the obvious and changed the crank position sensor, then the coil and ignition controler, and the distributor and...

My problem is this. on my cherokee with a 3" lift sometimes going around corners if I hit a bump the front end starts to wobble. I've already replaced the trac arm. I don't really have much of an idea as to what is causing this please help.

My soon to be father-in-law found a 94 cherokee with a 2.5, 5 speed, 4x4 he can get it from the guy for around $500. the only problem is the Four wheel drive doesn't work which is an easy fix. if he gets it he wants to do an engine swap to a chevy small block. does anybody know any good websites...

Ok to fit 33 without trimming you need a 6". Personally I think a 4" or 4.5" with 33"s looks kinda wierd plus you lose some articulation. I'd just stick with 31"s. If you are looking to trim a lot, go with the 2 door. You can trim a lot more than on the 4 door.

If you use all of your existing sensors, manifolds, etc. it will drop right in. but if the new motor is out of a 5-speed vehicle and yours is an auto or vice-versa you have to change fly wheels.

To clear 33"s I think you need a 6" lift not totally sure. then you need a slip yolk eliminator a cv drive shaft, and I think a regearing of the axles. which is worth it if its going to be a heavily off roaded vehicle but then your in to it for a lot of $$$$$$. And while your at it you might as...

Does anybody know how far you can drop the t-case? I don't have a lot of money so I'm doing it myself. Is the only thing you have to watch for is the back of the motor and the firewall?

I meant crank sensor, and it runs fine, when it doesn't start i just tap on it with a piece of pipe or something and it starts. I need to fix the problem, but i'm procrastinating even though my brother works at O'reillys. Thanks for the help.

it was the cam posistion sensor I looked at some other web sites and they said the same thing. So how do you fix the problem? Get a new sensor or tightet the bolts? All I know is its a pain to get to.

Possible XJ Owner I have a 90 cherokee 4.0 5 speed, my problem is it won't start. It turns over but won't start, all the connections are like they should be that I can think of.I checked the coil I tried to ground it out to the block and check for a spark but there wasn't any. could it need a...

Ive, got a friend whose is looking for a cherokee, he wants a 92 and up 4x4, he would like a 5-speed but an auto is ok, if any body has one or knows where to find one could you let me know. We live in missouri so just about everywhere is ok to travel to, except for New York, or California. Any...

ok thats what i thought but i wasn't sure thanks for the help, Jon

I have a 90 cherokee 4.0 5 speed non H.O. I was wondering what transmission I could have? would it be the ax-15 or was that not an option until the HO.

does anybody know how to route the belt on a 4.0? I know this is a stupid question but i don't remember how it went on. if anybody knows where a picture of how it goes on or can explain how it goes on please tell me. I really need to get a repair manual but haven't got the chance. does anybody...

The 4.0 if maintained properly should easily go in excess of 200,000, but i don't know about the transmission i would think it would do about the same if properly maintained.

I have a 90 4.0 5 speed cherokee my brother recently came upon a 92 grand cherokee. I plan to swap the non H.O. for the 92's H.O. 4.0 I know you have to swap the wiring harness but will it's wiring harness work because it has an automatic. does anybody know if in 92 the auto's were electronic or...

I'm pretty sure that any XJ site will do for tech because everything fromthe a pillar forward is the same or should be so any good Xj person should be able to help with tech questions.

I had to take off the grill support and, because the front end is lightly wrecked so taking out the radiator and A/C condensor was in the game plan. I ended up dropping the t-case and transmission to get to the top bellhousing bolts then putting it backand getting the rest of the bolts. Thanks...

Does anybody know the easiest way to pull a 4.0 out of a cherokee? Do you need to drop the transmission and t-case?Or is ther an easier way? Any help is greatly appriciated!!!!!

Maint Req'd Light Does anyone know where to get a cv driveshaft for a cherokee? I would like to find a good dealer on the internet. Any help would be great. Thanks Jon