Help needed from CJ owner with stock wiring harness, 258 and digital camera...I just installed a weber 34 and am having trouble with the electric choke wiring. I have traced the wires from the oil pressure switch to this 6 pin connector (see pictures). The 2 wires (red and red w/ white) on the upper right of the 6 pin picture are the ones coming from the switch. The wires are a different color on the other side of the connector. One of the orange wires runs someplace else in the harness and I connected the second to the choke but is has no juice. Is this connector stock? Pictures I have seen of the echoke connection on a bbd show 2 wires (red and red w/ white). Also, the PO cut the wire to the manifold heater (see picture). I have been told that it ties into a relay. Any pics showing where these wires tie into the stock harness would be appreciated. Thank you, Rob
http://i163.photobucket.com/albums/t310/RLBJeep/DSC01417.jpg
http://i163.photobucket.com/albums/t310/RLBJeep/DSC00179WinCE.jpg
http://i163.photobucket.com/albums/t310/RLBJeep/DSC00181WinCE.jpg
