TJ Tire Size

Mxpx182lit

New member
1066212

Okay i Have a 99 Wrangler with a 4 in Pro comp stage 2 suspesion lift with a 1 in hockey puck body lift. T gain some more clearance i recently removed the fender falres and busted out the sawzall. All wes well untill i stepped back and took a look at her. It looks like a matchbox! doeas anyone knkow if i could fit 37 inchers or should i go with the 35 inchers. I currently run 33s

J[addsig]
 

1066226

Hockey puck body lift? I will not go there.
It all depends on how much material you removed. also keep in mind that if you did not roll tha cut edge, if your tire comes into contact with the body, it will cut the hell out of your tires. Find out what your max articulation is, measure the distance between your tire and closest fender well, subtract an inch and add the difference to your current tire
EX.. under max articulation, (determined with an indexing ramp) with 33's you have 4 inches of free space (distance between the tire and fender) I would subtract an inch, which is 3 and add that to your tire diameter- 33+3=36 I would run a 35 inch tire to be on the safe side.[addsig]
 
1066251

Hockey puck body lift? I will not go there.
You just did :roll: :lol: Hockey puck lifts rule 8-)

jps4jeep, remember that when measuring the distance from the tire to the fender, any increase in tire height of this same measurement will only be 1/2 the measurement closer to the fender. Difference is radius v. diameter. Any increase in diameter will only increase the radius by 1/2, thus only closing 1/2 the distance to the fender.

Stick with 35" tires, depending on axle gearing, and especially with stock axles. Let's see some pics of this hack job :-D [addsig]
 
Back
Top