Leveling problem

[WV04RUBI]

I am having a problem with my 04 rubi. About a year ago I installed a 4" lift on my jeep and everything went fine my rubi was sitting level, I then purchased a warn winch, model CE M8000, now the front end is sitting a little lower. I was wonderin if anyone had any suggestion?

 

[SteelHeadz]

I've seen this happen not so long ago. I suggested to the owner to measure the difference between the front and rear Trim height, and measure the amount of coil spring spacer, Add the difference from the trim height to the Coil spring spacer and use that info. when you Order a new Pair of Spacers for the front.

 

[Bounty__Hunter]

I'd get another set of stock front coil isolators (5/8") or an aftermarket 3/4" spacer and add it above the front coils. All spacers and isolators are stackable for customizing the ride height.

 

[WV04RUBI]

So all i have to do is take the measurements as suggested by Mickey, and then buy and install a set of spacers for the front coils? sounds simple enough. Thank you for the help with this problem.

 

[Bounty__Hunter]

That's it.