jay79cj7
New member
Guys,
I posted this yesterday but it disappeared... Anyway, I ran across this write-up the other night. I have seen very little talk of this upgrade on this board, so I thought I would share. In a nutshell, this is the TFI upgrade along with wiring in the HEI ignition module to replace the Duraspark one. There are other very useful docs posted here as well. I thought it may be of use to some of you. I did this ignition mod a while back and its working quite well for me. I started with the TFI mod a couple years ago, but after blowing through a couple ignition modules and rectifying that with radio shack resistors, I sought a more robust solution. No more worrying about ballast resistors or resistance wire.
http://www.esnips.com/_t_/Jeep
J
I posted this yesterday but it disappeared... Anyway, I ran across this write-up the other night. I have seen very little talk of this upgrade on this board, so I thought I would share. In a nutshell, this is the TFI upgrade along with wiring in the HEI ignition module to replace the Duraspark one. There are other very useful docs posted here as well. I thought it may be of use to some of you. I did this ignition mod a while back and its working quite well for me. I started with the TFI mod a couple years ago, but after blowing through a couple ignition modules and rectifying that with radio shack resistors, I sought a more robust solution. No more worrying about ballast resistors or resistance wire.
http://www.esnips.com/_t_/Jeep
J
