Z ZIGJK New member Sep 9, 2019 #1 I can shift Jeep into 1st and let out on the clutch but it won't go anywhere. Suggestions on issue?
JPNinPA Well-known member Sep 9, 2019 #2 Does reverse work? Ok if you rev 1000-1200 rpm put it in 2nd or 3rd and slowly let the clutch out, will it move? Regards, JPNinPA Sent using TapTalk
Does reverse work? Ok if you rev 1000-1200 rpm put it in 2nd or 3rd and slowly let the clutch out, will it move? Regards, JPNinPA Sent using TapTalk
aggreX Member Sep 9, 2019 #3 Was this a gradual problem with any symptoms or a sudden problem? Any noises or grinding or burnt toast smells? Otherwise ya might have to drop the trans or take the jeep into a shop.
Was this a gradual problem with any symptoms or a sudden problem? Any noises or grinding or burnt toast smells? Otherwise ya might have to drop the trans or take the jeep into a shop.
M mark sr Member Sep 10, 2019 #4 Is this only an issue with 1st gear? do the other gears work properly? If it's not a linkage issue it's likely internal
Is this only an issue with 1st gear? do the other gears work properly? If it's not a linkage issue it's likely internal
M mark sr Member Sep 11, 2019 #10 Sounds like it might be a linkage problem with it stuck between gears.
JPNinPA Well-known member Sep 11, 2019 #11 That ^^ or more significant clutch failure... Sent from my iPhone using Jeepz.com mobile app Last edited: Sep 11, 2019
JPNinPA Well-known member Sep 11, 2019 #12 Second thought Is your transfer case in neutral? Sent from my iPhone using Jeepz.com mobile app
