bolt

I broke a bolt off on my tailgate, and decided to try welding a new bolt to it in order to get the bolt out. I've seen it done (on youtube), but never did it myself. The bolt broke off because the threads were fowled up. Luckily, it broke off with a nub sticking out. In hindsight, I...

A source for steering column horn parts is wanted. The plastic piece with 2 metal legs protruding from it under the bolt holding the key lock in place. Its held down with a straight spring.

I banged my fenders up pretty well, last time I wend offroading, and I'm thinking about going with flat fenders on my TJ. All that I've seen require you to cut down your existing fender, then place the new fender on top of it. Are there any out there that are bolt in replacements, the same way...

Search this but all I found was info on plastic fender flair removal & install. I'm looking for "how to" video or written instructions for how to remove the metal inner fender on my '08 JK. I've removed all the obvious bolts that I can see but its still not coming off. From looking at pic's of...

Can someone tell me how to remove/replace the belt tensioner bracket (bracket w/long bolt) from the power steering pump? Does anyone know the size and length of the belt tensioner bolt my broke when trying to change belt? thanks, 934bangeryj

Trying to resurrect my 86 cj7. Bought a rebuilt cylinder head, already returned my original. Tried to bolt it on and the cylinder head bolt holes are too small. Block has 1/2 inch bolts. Cylinder head has holes for 7/16. Can someone tell me, what size the hole was from the factory? Going...

Installed a set of KC Cyclone 2-light Under Hood lights. Ran the wires through the hood reinforcement beams. KC lights come with everything you need: protective wire wrap, wire harness and switch. Made one change to the instructions by using rivet nutserts to bolt the lights onto the hood...

Howdy folks, new member here, texas born and raised, live in the dfw area, have a 1976 jeep j10 honcho, just installed anew 360 in it, with lots of go fast goodies, old 401 put down 228 hp, 414 torque, but at the time didn't realize it was a 401 until I pulled it out, had already sunk a bunch of...

I have a 2002 Grand Cherokee. I have the caliper off, but the bracket that surrounds the rotor is stuck. The two 18 mm bolts on the back are seized. I've broke one cheap socket already. I don't want to use a torch because of all the tubing around. I have sprayed it with PB blaster. Just...