Search results

OK, I thought this would be a shot in the dark. I am looking for a either complete rear axle assembly Dana 44 from a 1986 CJ-7 with either 2.73's or 3.54's in it. OR, if somebody just has the axle housing, I would interested in that as well! Must be unmodified. Thank you.

wm69, welcome to the club! LOL, when I scraped off all of the gunk off the axle boss and saw that "D", my heart sank! Looking to go to 3.54's (I plan on runnin' 32" tires max), but these things don't come cheap. Good luck. You will need a new carrier, looking at about $150 for that alone.

'04 Rubi pro's and con's Speaking of New Mexico, I went to NMSU in Las Cruces for a couple of years. I miss the food down there! But west of El Paso over by Sunland Park there is this incredible barbecue restaurant, and for the life of me I can't remember the name of it. Man that was good...

Get a load of this... So I called a local place to get an estimate to replace my stock 2.73's to 3.54's, and they told me $1600! $1600! They said that I needed to get a new carrier for the AMC 20, but still, $1600 is way too much in my opinion.

You know, after reading a bunch of stuff on the internet, I just assumed I had 3.73's. Of course, what happens when one assumes? Exactly. So, when I finally looked at the service manual, I saw these codes. And sonofa... Well, not trying to change the reason for the post, but if I were to run...

Yes, the ratios have to be the same. I was really hoping to find a single H (3.73) but instead have 2.73's. My crawl ratio is a whopping 27:1! Woo- oh... wait, no. :cry:

What a coincidence! I just looked at mine a couple of days ago. It is to the right side of the diff facing out. It is on the axle boss right before you get to the shaft. I had to use degreaser and a scraper to expose it. I hope you don't find a single "D" like I did! :( Good luck!

Thanks for the reply, I got a steering wheel puller yesterday and got it all fixed. I didn't have any problems getting the steering wheel off! Guess I got lucky. Now my horn works, and I am gonna be a beepin' fool! :lol:

OK, so I replaced the horn and the spring plate, but now I have to replace the horn contact. It appears I have to pull the steering wheel off. Is this correct? If not, then what do I need to do. Thank you in advance.

That's awesome that you did the horn parts write-up! Mine doesn't work, and this couldn't have come at a better time. Thank you!

Thank you all for the responses. Bounty Hunter, are you talking about mechanical vibrations transmitting into the frame? What would be the extent of the vibrations?

I was looking at my body mounts yesterday and they are shot! So, should I go with rubber or polyurethane? My main concern is the overall stiffness, and the accompanying chiropractor bills. Also, which should I use for the engine mounts?

Well, I thought I would just jump into the foray and offer my $0.02. Being a newbie to CJ's (I had a '72 Waggy), and a complete newbie to auto repair, I must say the Weber 38 went right on and was very easy for me to adjust. I had gone through all the vacuum hoses when I first bought the Jeep...

I've seen the type of filter that jay is talking about. In fact, on a write-up of a Weber install, one guy uses that breather filter instead of running the PCV air-in line to the filter. Correct me if I'm wrong, but I think those are used in some import vehicles? Anyways, filtered air should...

Hi, when I first got my '85 CJ I had to go through and replace about 90% of the vacuum hoses, and needless to say, it was a pain-in-the-ass! Here is a vacuum hose diagram. Follow this and it will help you out. The front hose does run to the carb, which is the PCV air out. The back hose should...

Tire cover Well. I got it figured out. I timed it correctly to 9 deg btdc and richened the mixture a tad, and now it runs pretty damn strong.

New upgrade for my Jeep! Woohoo! Thanks for the reply, did you get larger or smaller jets?

Hi, I have an '85 CJ with an HEI distributor and Weber 38 carb. My HEI is setup at 16 deg btdc, and spark plugs are gapped at 0.045". My carbs idle mixture screw is 1-1/2 turns out, which is the maximum. My idle speed is around 700 rpm. Stepping on the pedal in a regular fashion is fine, but...

I just recently installed a Weber 38 on my '85 Cj-7, and man, my Jeep is a monster now. My engine is stock, I have the HEI distributor, and now with the carb it runs beautifully. Like chinard said, run ported vacuum to the distributor, and manifold vacuum to the CTO. One thing I also did was...

I recently put the Weber 38 carb on my stock 258, and it makes a world of difference. I have had to lean it out pretty good, in fact, I am still adjusting it. Not that it's difficult, but I have very little experience, and these things take time with me. I have a noticeable increase in torque...