Search results

I can't find a front axle shaft with a u-joint style but the parts store has one with a CV style is that interchangable??? Thanks Evan

Sold Thanks for looking Evan

Unfortanatly it is time to grow up which means parting with my jeep. It is a 1999 TJ Sahara black with black hard top. 65,xxx miles 4.0 Inline 6, Auto 5.5" Rubicon Express Long arm lift 1" Body Lift 37" MTR Goodyears with over half tread left ARB Air locker up front, Soft Locker in the rear...

I have the Antirock system on my jeep and it was on the jeep when I bought it and I have a question because I have no paperwork on the system. My question is which hole in the bar is the most stiff setting? I mainly drive my jeep in town and on the highway and was wandering what the stiffest...

You might want to try an impact driver to get the screws out. I do this all the time at work when those screws are not cooperating. Don't worry about putting them back in when you are done.

Thanks for the info, I will ck that as soon as I have a chance. I miss my 89 Sahara I wish I never would have sold it and one day I hope to find another Sahara in that color.

I have found that usually tire balance problems are very consistent where this problem is not. It's like if I hit a bump or the vibration starts it can't stop itself and that is why I thought that the stabilizer had something to do with it. I have seen cars in the past with similar problems, but...

Also there is a bushing inside the tail cone of the t-case as that wears out it can cause the seal to leak because the slip yoke is moving more than it should. I would suggest taking the tail cone off and finding somewhere or someone to put a new bushing in at the same time or the leak will come...

I don't think it's a tire balance issue, and the vibration is from the front, I do have a sye kit in the rear. The tires are moving back and forth, and I think this is what is causing the vibration. I wasn't saying that the tires were causing my problem I was just filling everyone in on the...

I now have a 99 tj which has a rubicon express long arm kit and sits on 37s. I have a vibration at highway/interstate speeds. I belive that the vibration is due to the stabilizer not being up to the task of dampening the big tires. My question is what is the best choice to upgrade my stabilizer...

Jeep sold thanks Ebay

This jeep needs to go soon no reasonable offer will be refused. Thanks Evan

RE: Recharging the AC 1950 cj-3a, 6cyl ford, 3spd, hi-low t-case, 33x12.5 swampers, in good shape, runs good just had carb gone trough, needs front floors and starter. 1500 obo E-mail Jeepr89@yahoo.com or call 402-430-1542 Can e-mail pics if wanted jeep is located in Lincoln, NE can deliver...

Don't waste your time trying to get the bleeder out. Get a new caliper from the parts store for the 10-30bucks you spend will save you time and headache of trying to get that bleeder screw out. Also a tip for next time as you are trying to loosen the bleeder screw with your wrench lightly tap...

Did you look at trade in value or what????? I'm sure he would deal with you a little bit, however I checked on KBB.com today and I looked at both private party value and also the price you would see at a dealer and 6200 is right in the middle of those two values. The best thing I could tell you...

Re: RE: Re: RE: Re: join date on the 2000 4.0 is there that gay dis system with three coils directly over the plugs???? If not ck to see if the spark is taking an easier path to ground and sparking out of the plug wires, to do this take a test light ground it and run it along each wire. that...

RE: Re: RE: do i need shock boots? I am posting this for a friend. 1993 YJ Sahara Green Hardtop 6cyl, 5spd, AC, 167,000miles Infinity speakers in dash and soundbar, has boxes for 6x9s Waterproof seat covers, Bikini top 1inch poly body lift, 31x10.50BFG MT with about 12k well maintained...

I am about ready to pull the drivetrain out of my 1950 CJ3A and was wondering if anyone would be interested in the front and rear diffs, the trans and t-case, and the motor. All of which is original except for the motor which is a 170 inline six ford engine. The gears in the diffs are somewhere...

RE: Another NEW XJ member I have heard that most "mud" tires are going to lack traction on the icy slick roads. The thing about a tire that helps in these situations are sipes little slits in the tread, if you look at a snow tire you will see what I am talking about. I have a couple friends who...

I think I might have figured out the problem today. The sparetire I believe was at one point hit buy something and pushed the tailgate. I think the tailgate was replaced and the new one was not making contact with the seal all the way especially in the center. I got someof that door edging stuff...