Search results

1049409 right now i have the capabilities to bend up to 2" pipe at our shop, but might be able to get bigger bent elsewhere- its not that big, but we will prolly be goin out to the shop to try and get some things started- If you are on IM- JLAudiofan3 is me and we can talk a little faster...

1049411 I love some rock, something that gets the blood flowin!! When I am on the road the hum of the mudders on blacktop is music to any Jeepers ears!! -thats when I can hear over the wind comin behind the doors!! [addsig]

1049415 I have read several articles about the 'tornado air' that you install in the intake tube, supposed to swirl the air or something like that- have read more than once that it didn't do anything for the vehicle- Car and Driver did a test on the tornado on a test track, tested both...

1049552 What color are the current ones now? - I will let you know on it-[addsig]

1049553 If you don't know how to weld, i would suggest trying to use a stick(arc) welder first, this way, it will only let you appreciate how easy a MIG welder is to use!!!![addsig]

1049554 If they are the 'soft' covers, they should fit; my friend used a generic 6" light in a KC light housing, so I would assume that even a harder plastic cover should work too, even if it doesn't a little TLC should make it work-[addsig]

1049555 It sounds like it should be. If not, there are usually people around that can come by and see what needs to be made. As to the driveshaft, I would also drop the t-case if that is not included with the kit. This can be done with either square stock steel, (we used 1.5"), or you could...

1049557 I am in the army and let me say that those are only rumors at this point. It is a lot harder to reinstate the draft than most think. It would have to be ALL OUT WAR with us vs. EVERYONE to reinstate the draft... Our military is incredibily superior to virutally everyone, so I...

1049710 i drilled a hole in behind the door, above the strap that holds it. This way the wires run directly underneath the dash and the hole isn't totally exposed to the weather, which would in turn help keep rust away...[addsig]

1049712 If you are going to be replacing it anyway, go with the posi-lock system. Not only can you engage immediately but you can also run in 2 wheel drive in low, which saves your clutch on the hills when you don't need 4WD. I will either be getting this system soon or trying my hand at...

1049714 sounds like a vacuum leak- make sure first that everything is connected then check the lines to make sure they are working, if not at the axle, then move back to the t-case or farther until you find out where the problem is.[addsig]

1049719 I was not trying to start anything by what I said earlier- I was only trying to instill a little pride in our country. I am EXTREMELY patriotic since I joined the military and try to let others know that. We should all be VERY thankful for the rights and freedoms that we enjoy...

1049735 My preference is are the Bosch Plat. plugs. I have read many articles about the splitfire plugs and in every one I have seen the Bosch plugs perform better. This was of course while reading for plugs for my Camaro, but I would assume that if the Bosch plugs work better in a V8, then...

1049835 In regards to spark plugs again, a lot of it depends on your personal perference. Some people swear by Bosch, some swear by Splitfire. I personally much prefer Splitfire, but that is my opinion. Either way, one thing to keep in mind is that crappy plugs usually will need to be...

1049837 I was in on that post- What I was told to do was to buy some heavy duty tow strap, wrap in around the t-case in a spot that doesn't have any thing that will rub on the strap to much, then fasten the strap to the frame. Pretty simple and will keep the transfer case centered fairly...

1049839 31's should fit- too bad its a TJ, you can get shackle lift real quick and real easy in a YJ.... O well. But the 31's will be a tight fit, but it is able to be done as long as you make sure not to go over to rough of terrain for the time being....[addsig]

1049841 There is still a chance that the cats are plugged. When there is resistance in the exhaust system, it will show around the headers for a couple reasons. 1-The exhaust is hottest here 2-With the bends in the pipes, it has more resistance to flow thru them I would try and...

1049857 I look at it like a duty to serve. When everything happened last September, I was new to the service. I did not want to go over seas and fight, I wanted to stay home and just try and forget that everything that happened. That was then, this is now. I am fully looking forward to be...

1049859 If you were to look at a spec sheet printout on a Jeep one would think that a Jeep would fairly good gas mileage. Weighing around 24-2600 lbs. with a 2.5 4 banger or 4.0 inline 6. These numbers kinda resemble an import car that gets 35 mpg. But thanks to our wonderful aerodynamic...

1049861 I would say yes, any time you do anything to the suspension or alter anything that has a direct effect on wear on any items, then I would say it would void the warranty. Are you close on your mileage?? Often if you get a shady dealer, they will try anything to try and get out of doing...