Search results

Thats what i was hopeing it would be. Would the injector cleaner have correded it more or do was it just coincidence? Also this is probably obvious but should i just go ahead and replace all of them at once or just find the one thats leaking?

I have a 90 XJ 4.0 Liter with fuel injection. yesterday i put in some fuel injector cleaner and some premium fuel to help clean out the system cause its not idleing good. I parked it and left it running this morning for 5-10minues and came out to a huge puddle of fuel under the motor on the...

I have a 90 Jeep Cherokee and my brakes have been horrible since I bought it three years ago. I replaced the front brakes not the rears but the most notable reason the brakes may not work well is that there is a hissing sound when I hit the brakes. Is this a bad brake booster? Is there a way...

I should have been more specific about the bro.. he helps the mechanics work on stuff and does oil changes and the 100 point inspections not a full mechanic yet thats why i said sort of. The brake pad was squishy before the master cylinder and after i replaced it ive bleed the brakes multiple...

Im taking a weekend to get a bunch of things needed fixing..fixed. My brother has worked as a mechanic (sort of) at a few different places. He is working on going to school for it. So he will help and knows a fair amount from working at a Jeep Dealership. Problems are listed below. Im...

I always forget year and such. its a 90 laredo with a 4.0. Thats what i figured the chiltons manual says to take the belt off but the fan clutch isnt even attached to that in any way. So if i could get around that tedious task and just unbolt the clutch and fan from the pulley that was the...

I am going to replace my fan cluth this weekend. It says to take the belt off is there a reason for this? I'm just wondering because it looks like the fan clutch bolts into the pulley. Or does the pully come off? Any light shed on this would be great before I jump into this. Thanks.

RE: Welding help anyone? I'm pretty sure its the master. I picked one up the other day and I am going to install it on Saturday. I am new to "bench bleeding" what do I use to hold the master while I push in the cylinders? It says not to use a vice? Any suggestions would be helpful. I have...

RE: "Ugliest Dog Crowned" (You My pedal has always been spongy and when I have bleed the brakes in the past it has been a solid feel on the pedal for about a day but then gets spongy again. Now its 10 times worse. Any other suggestions?

Gas Cable Problems My brakes have been pretty bad since the day I purchased the jeep (3 years ago) it used to make a hissing noise when I would brake (brake booster seal problem?) well finally they went out. I can stop but the pedal goes to the floor and defiently wont stop me if I have to...

RE: cheap websites for yj models I bought a new sender unit because it was way cheaper then buying the device you have pictured. I thought about getting that but for now i will just try installing a new unit. is this something easy to do?

Lately my oil pressure has been a little low. now whenever i floor it wont go above 30 pounds of pressure. I purchased a new oil sending unit it was cheap so why not. Any suggestions on how to check this problem or what it might be. I have a 1990 cherokee with a 4.0L. I have a huge trip to...

RE: lesson to be learned I'm not sure this will work but i heard from my brother who works along side a bunch of mechanics that you could spray a little bit of carb cleaner around vacuum areas and if the engine revs up youve found your area because the engine will possibly suck in the cleaner...

Thats the problem. Once I hit a stop light or get stuck in city traffic it starts to move above the 210 mark. So far the worst its ever gone is half way between the 210 mark and the next black tick mark. Luckly never totally overheated the engine and I always run my heat to help cool it off...

Ok thanks for the info about the belt. I went online and re-read the site i fuond about installing a flex-a-lite #110 electric fan. Looks simple enough.

My jeep usually runs at a little lower about the 210 mark. When it runs hot it starts to go above the 210 mark. I cant remember what thermo I put in. But the truck runs hot when im stopped so maybe it is the fan clutch. When I put the electric fan in place of the belt driven one. Do I have...

RE: Re: RE: Re: RE: "Sandwhich" or "Sammich&a Is there a way to see if the fan clutch is wearing out? I already planned on trying to replace that fan with a new electric fan. Also if the water pump was going out would it make sort of a weird clunking noise? I kind of remember reading some...

RE: Vegas Bachelor Party aftermath prank (work safe) Ok so about a year or more ago i replaced my radiator before that i replaced my thremostat and yet im still running hot when its warm. What is still causing my truck to run hot. On a side note im thinking of replaced my fans with upgraded...

Score one for the Jeep dealer I have a 90 4.0l auto and I'm always looking for performance items to put on it just for fun. They are extremely hard to find but I finally found a new throttle body that will fit this and i will be able to afford it soon. I'm wondering how this will affect my...

RE: Re: Random Poetry... I just replaced the belt and we looked and nothing was touching the radiator and such. The clicking happened before i replaced and continued after i replaced the lifters. I believe it does get quicker as i increase engine speed once i get up there though the engine is...