Search results

My transfer case on my 95 wrangler was replaced a few months ago...It has been working fine until this morning? It acts as if though it slips out when i go from forward to reverse or vice versa? Any ideas? Thanks,

My 95 Jeep wrangler says it has a full tank all the time? What can I do to fix this problem? Thanks,

Hey guys, the question is will a 99 wrangler t-case bolt to my 95? Both of them are 4 cyl 5-speeds......? thanks!

ok.....so I put the jeep on jackstands adjusted the linkage and had it engaging in 4hi and 4lo everytime........took it off the stands and went to go try it and had 4hi sometimes and absolutely no 4lo......? weird? Any suggestions? Thanks!

Thanks for the replies guys! I am going to do some more adjusting on the linkage this weekend......is there a trick to knowing that your in for sure without climbing a hill and slinging mud? Can you jack it up on jackstands and get the same results? Thanks!

I have a 2in shackle lift. Thanks for the reply!

My four wheel drive doesnt always engage it kind of has a mind of its own iguess you could say? When it does go in it goes good until it decides to pop out.....or even when i put it in reverse.....what would cause this? Thanks guys!

Well I adjusted the linkage and it works! Whenever I pull forward it is in and stays in.......then I back up and it goes out or vice versa? What could be causing this? Any ideas?

Haha! yeah i didnt have a gear chart.............? obviously! lol!

I have the same year jeep! I also had the same prob with my transmission....the second gear synchro was bad especially when I down shifted! I replaced the gear oil with some synchromesh and it solved my problem! Amazing! As far as the gears go hear is what i have learned! 1) Take your tire...

Ok still have a little snow here......got in a flat place that was slick and stopped......backed up and back tires spun.......put it in 4hi backed right up.......i bumped the shifter with my hand tried it, and it spun......took it out engaged it again worked fine.......bumped it it was out! Got...

Well that makes a lot of since and makes me feel a lot better about he problem.......I am going to make some more adjustments today and see how it goes.....a little fine tuning you might say! Thanks guys for all the advice.....it feels to know where to get good advice when you need it!!!!! I'm...

so what you are saying is that only two wheel should turn at one time? That would make since because i saw that my drivers front and passenger rear would spin together and passenger front and drivers rear would spin together.......? Is that the way it is supposed to be? If that is the case then...

Is there supposed to be play in the posi-lok cable when you pull it? It pulls all the way out everytime, but dont push in all the way all the time it has to be lined up in order to push it in seems like? I will try to adjust the shifter linkage...and upgrade my fork as well i guess? Its driving...

the front drive shaft will turn when engaged into 4lo and 4hi....could this still be the problem? Thanks!

So i have went back and forth with a 4x4 issue......thought it was a vacuum leak....installed a posi-lok! Still no 4x4......so i thought i needed to adjust the posi-lok and did just that........while on jack stands the front axle would engage everytime! So i took it for a test drive and it was a...

Thanks for all the advice guys! The problem is now fixed and for good.....I hope! The posi-lok just needed a little adjusting!

not sure I really havent popped it open to see? I priced getting an overhaul kit compared to just buying a used axle and it was relatively the same price considering the labor that might be involved with the rebuild? Is this a bad idea to go with the used axle?

Hey guys I got a nearly brand new shift motor i need to get rid of! I recently bought the motor because I thought my old one was bad.....replaced the motors had it in for about 2-3 weeks and never got to use it and replaced it with a posi-lok system. I paid right at $100 for it but will take...

ok....so i have realized that my front differential is bad? I can get a new front end assembly for around $300......while swapping the front ends out what other things should i go ahead and replace or look for while replacing? Is there anything special that i would need or is it just as easy as...