Search results

That would most likely be the traction light. And Terry is correct, if the steering wheel is not centered while driving straight , the electronic stability program will think there's a loss of traction on one of the tires and activate the yellow traction lamp on. Sent from my iPad using Jeepz

Did you buy it as an assembly or did you buy it with the speaker separate from the box and amp? . I'm trying to get some ideas. Thanks. Sent from my iPad using Jeepz

Manual or automatic transmission? Sent from my iPad using Jeepz

It's likely come loose off the transfer case lever grommet. Or the grommet is just plain wore out. You can buy the grommet from a dealer. Sent from my iPad using Jeepz

Has anyone here tried the Soundstream 8" loaded subwoofer? .. It's thin and supposed to be able to be mounted under a seat. I saw it on eBay and the price wasn't that bad either. Just curious if its worth it. Comments? Sent from my iPad using Jeepz

Which gauges are not working? Sent from my iPad using Jeepz

Upgraded the light bar to a Rigid 50" E-series combo. Sent from my iPad using Jeepz

That is awesome! .. Nice work..

Blown fuse or bad motor. Wiggle the wiring to the blower motor and see if its a connection issue , if not, check the fuses and test the blower motor circuit with a test light.

I'd start with the ignition circuits and switch first. It sounds like you have a bad switch.

19 was our lowest and its slowly going up. 36 this morning with the high at 65.

It's really not that difficult to build from what I've researched in YouTube. I'm looking for a DVD burner from an old computer to start this project. I know I have a few up in he attic. The driver is simple to build as well. Mounting it on a bot or a quad will require a gimbal type mount with...

I like that idea!

Welcome to Jeepz.com ...Look up Houston Jeep freaks there in Houston around the woodlands area. Good folks and they go all over Texas to wheel.

That's awesome. Been wanting to build one for the quad.

Terry, Unfortunately, cleaning the O2 sensor will not fix the issue. Once the O2 sensor shows failure , it needs to be replaced due to contamination or internal damage. Do the suggested throttle body cleaning and check it for exhaust leak if you haven't already before replacing the sensor.

Happy new year!!

Try to reset the radio. Pull the IOD or radio fuse from the fuse box under the hood. Give it 2 mins before you re-install the fuse. If that doesn't work the next best reset is through software. The factory scan tool will be required to do this. You might also have the dealer check for any...

Try pushing the lock and unlock buttons at the same time. Then push one the buttons to see if the fob works. If it still doesn't work then the only alternative i know is to take it to a dealer.

Merry Christmas and a Happy New year y'all !! Happy Jeepi'n.... Thank you for being a part of our jeep family.