Search results

I have the 4" on my 97 TJ i really like it it easy to install works great rides like any other lift (ITS NOT STOCK) rides great down the highway it does have a little sway to it... BUT!!! keep it greased cuz the bushings are plastic..i installed a 4" on my 97 and a friends 04 WE LOVE IT...

no im saying i have a 1995 YJ with a soft top and half doors.. And i picked up a set of full steel doors.. thstock doors are squire at the top corner and the steel doors are round so there is a gap..also you have to take out the strip on the windshild frame for the steel doors to close....I also...

ok so i picked up a set of yj steel doors the cornors are round but my stock half doors are squire what fill the gap on a yj? and i know its not the same thing as my TJ inserts that the top kooks to..

so if i get a dif that will fit the 4.10s it would work fine?

I have a 1997 and a 2004 wrangler i want to know if the 4.11 gears from my 97 are the same or if thay will work in my 04 yes there both dana 35's my 97 has 4.11 my 04 has 3.73

Id love to but i am going camping in newaygo...

I get 3 waves out of 5 jeeps here in michigan or so..

We had alot of fun at the 2010 blessing of the jeeps..

I also recommend the same as bounty__hunter I keep the nuts off.... swing side to side and pull up it will come off some are easy but some are hard..I do put some lithium grease on the studs it helps for next time..

I had the same thing and did this... Jeep Homemade Swaybar Disconnects It worked great and still working.. this was my post.. http://www.jeepz.com/forum/cj-yj-tj-jk/28692-front-sway-bar-links.html

OK thanks again ill try it

Ok so i unpluged the DRL box and it worked the lights did not come on.. Thanks steelheadz If i leave it unpluged will it hurt anything? is that the only thing it is for?

My jeep has DRL i was looking on how to turn them off and can't find anything so does anyone know anything about how to turn them off? there not on when i start it up thay come on after i move about 2 feet.. thanks..

well thanks everyone ill try to get it fixed up..

Does anybody know anything about patching a pin hole in a soft top or where to get a patch?

I'v had my TJ 7 years and never had that happen..

Just a reminder that its time for the blessing of the jeeps I will post pictures on facebook at jeepz & brian reichard hope to see you there..

Take it in to a machine shop it should be under $100 to take out the old ones and put in new ones... i spent $240 on a 350 chevy for getting it cleaned and .30 bore job new freeze pluges and cam bearings.

That was bas a$$.. Id love to name a jeep club cowboys from hell.