Search results

Front Driveshaft Spinning Looking at the relationship of the hood to grill the passenger side looks closer than the driver side. Mine was like that. The fronf frame horns were out about 3/4". mike

RE: Polar Bears Not trying to sound like a commercial, but I have used an additive called ER. About two years ago I started using it and I have noticed the same thing. Engine temp decreased about 10 degrees. The old four banger keeps on tickin like normal. ;) mike

Hang in there TC! Glad you decided to go the match, shows character as a dad. Now get yourself well... We'll put in an extra request for a speedy recovery with the "Big Boss" . on your behalf :wink: mike

RE: Help me pick a front bumper... I like 7... ;)

By George I think you have it! :) Well the switch is a little misrepresented. There are three conductors, but only two positions. The center post is the common device you want to redirect to one one side or the other. :) Known as SPDT ( single pole double throw). If you want to have...

YJ doors for sale - Red / Gray interior and Gray soft top... ARB. Kevin's looks like a fugitive from a plumbing convention. 8) mike

RE: Time Ok, Look closely at the drawing with the manual switch... When the switch is in the "AUTO" position only the shifter can activate the RELAY. When the manual switch is in the "ON" position the transmission mounted switch is no longer apart of the circuit, and the RELAY is...

Maybe I got ahead of myself. And Bounty-Hunter is right the switch is on the right side of the transmission. The voilet wire is the output from the switch. Either from here or it can be found inside the body as described in the drawing below. The first relay diagram was showwing an over...

Craig, I used the existing backup light circuit to drive a relay that would swicth the fused, new battery circuit to the lights. Running a larger current through the normal backup light switch could burn up the switch. I picked up the relay at Advanced Auto. It's has four connectors, two...

:lol: Interesting...

If this is a new kit, check your instructions. I remember reading about drilling the axle perches in there. It's 9/16". here is the link to the instructions=> http://rough.roughcountry.com/catalog_download.htm mike

Need help with rear shaft The 10th Annual All Breed Jeep Show, hosted by the PAJeep Club, is officially set for July 23 & 24, 2005. This event has grown over the past few years, and this year looks to be the best ever. It is held at the York County Fair Grounds, or as they like to be known as...

Tailgate hinges Don't foget "Dear Abby", "Saddle In The Rain". Man Mud those songs take me back a few. My Wilder days. :oops: mike

This one from the "Oops, I should have removed it myself deparment". :( Needless to say while doing all that work on my rig the past few weeks, I allowed one of the other guys remove the wiper motor without referencing the Factory Shop Manual I had on hand. :( Well, there is a nut and...

RE: Creek Pics Phatty X. Did you ever find these bolts?? I had to replace mine. Got them from Jeep, but I protested the price got them down to 2.80 each. Had I thought about it sooner, I should have just replace them with stainless. mike

Re: RE: another fuel tank question About the half size of a Pepsi bottle. :lol:

RE: Re: RE: Chat room Sunday at 9:00 est I increased the YJ fuel capacity about a half a liter by putting in the XJ fuel filler. It sits higher in the body than the stock filler neck and adds about a eight inches of fuel line. :) mike

Could be a trojan horse. Or maybe a java script. Are you running SpyBot SD? That can detect a lot of garbage that can trigger stuff like that. You may want to get the companion program listed in the SpyBot progarm called SpywareBlaster. It watches ActiveX and Java scripting. mike

Okay, THAT freaked me out! I use Spybot-SD and run Zone Alarm. My router also has a built in fire wall. We had a case awhile back, but I too am a strong supporter of frequent backups. Especially now with a thirteen year old giving my network a good workout. :roll: mike

Me too buddy! Takin' the YJ out to break it in. :lol: mike