Search results

You might look at furnature upholster or a boat upholster Never look down on anyone unless you are helping them up - Jesse Jackson

I replaced hinges on the glass hatch of a Liberty. There was no alignment. Check if the hinge is worn or if the gasket is flattening/dry rotting… Never look down on anyone unless you are helping them up - Jesse Jackson

Just glad you got it fixed. Stopping in more important than going or steering. Never look down on anyone unless you are helping them up - Jesse Jackson

03 TJ Factory Service Manual, here are the specs and tolerances: Caster: 7.0 degrees +/- 1.0 degree Cross caster: +/- 0.65 degrees Camber: -0.25 degrees +/- 0.63 degrees Cross camber: +/- 1.0 degrees Total toe: +0.30 degrees (or +0.15 degrees per side) +/- 0.06 degrees Thrust angle: +/- 0.25...

Call you local SZ or O’Reillys to see if their scan tool will do that. Its free. Was in NEPA now Dayton. Never look down on anyone unless you are helping them up - Jesse Jackson

Rocker pannel. BTW running boards should bolt to the frame Never look down on anyone unless you are helping them up - Jesse Jackson

Do these diagrams help? https://www.moparpartsgiant.com/parts-list/1987-jeep-cherokee/steering/housing_steering_column_upper.html Never look down on anyone unless you are helping them up - Jesse Jackson

Where do you live?? State and city? Any jeep clubs ??? You could get a second pair of eyes on the issue. Never look down on anyone unless you are helping them up - Jesse Jackson

Any luck yet? Never look down on anyone unless you are helping them up - Jesse Jackson

This kind Never look down on anyone unless you are helping them up - Jesse Jackson

Replace when leaking. Some vehicles have crush washers there and need to be changed to keep from leaking. Never look down on anyone unless you are helping them up - Jesse Jackson

You could have used the manufacturer and part number to look up in the Amazon. Never look down on anyone unless you are helping them up - Jesse Jackson

I converted my TJ to electric fan. Here is what i learned. 1) cfm is what matters. Not enough and you will overheat. 2) pulling not pushing. 3) pulling through the entire radiator by having a shroud that a. Fits the entire radiator. b. Is flush with the fan. c. Has no gaps to pull air from...

At the risk of sounding crazy….you don’t have anything in the way of the brake pedal that may stop movement??? As a test (without driving) can you remove the vac line and use a pump to pull a vac on the booster. Start the vehicle and test the brake. Reduce the vac and test the brake. If you...

I wouldnt think air in the abs would lock up the pedal it woukd make it spongy as the air is let into the system. https://youtu.be/nQRnKyVyMuQ?si=kTU8F3dU_fNzJc3Z Never look down on anyone unless you are helping them up - Jesse Jackson

Fuel pressure should be 49.5 +/-5 and should be steady across 700-5000 rpm. Not that this is your no start cause. Just the ckp has a paper gasket. On 00-06 TJ the 4.0 has an issue with ODPA weRing the CAM gear. The CPS sits on the ODPA Never look down on anyone unless you are helping...

https://www.rockauto.com/en/catalog/jeep,1987,cherokee,4.0l+242cid+l6,1179716,steering,power+steering+pump,7380 Never look down on anyone unless you are helping them up - Jesse Jackson

Injectors you should hear/feel tick when you place a screwdriver on the back of the injector, Fuel pressure? Fuel pump fuses or relay? Pics of spark plugs? Clean TB and IAC. Check IAC and TBS connections. Any codes??? When you replaced the CPS snd CKP did you use OEM. Others can be bad out...

Verify check valve is working and your vac line actually is pulling vac. You don’t have 2 check valves do you? If you were able to bleed the brakes there shouldn’t be an issue with the master… but gi ahead and replace it if you want. Never look down on anyone unless you are helping them up...

You tube https://youtu.be/QaUPC8TjzWA?si=H1BzSGuMGZOIcr5I Never look down on anyone unless you are helping them up - Jesse Jackson