Control Freak - Custom Fuse/Relay Blocks

Skinny Pedal

New member
Do you need to turn this
image-missing.png

Into this
image-missing.png

image-missing.png

Many configurations to choose from.
5 fused 35 amp relays and 5 aux fuses
20 fuses
3 fused 50 amp relays and 7 aux fuses

Control Freak Link

Feel free to ask about the different configurations. Best way to get the correct info is to plan on what you would like to run off the Control Freak and let me know. I will configure any way you like.
 

Here is a few shots of one leaving tomorrow.
image-missing.png

image-missing.png

The 7 way trailer cable runs to your switches to control the relays. The wiring with ends on is used to connect your accessories to the block. You plug the connector into the block and run the other end to what ever it is you are hooking up, lights, cb, yada yada. Each block comes with battery cables pre made to your length. Block can be setup to control the relays with power or ground, its your choice. If you would like to setup your own completely, I can sell you a blank block and all the connectors. Not shown in the picture is a water tight cover that snaps in place.
 
Back
Top