Search results

I am pretty certain that the rebult carb that was sold to me one ebay has been redone with a defective rebuild kit. The float will not activate fuel cut off and gas is leaking into the carb. This is causing it to NOT stall when the idle mixture screws are both turned all the way in. It...

I bought the Motorcraft 2100 kit off Ebay. We installed it and it ran 99% perfect. But I thought I had an air leak at the carb base so I removed everything. Bought better gaskets and reinstalled. Now it will start up and stumble a bit, I will give it gas and the idle will smooth out. I have the...

I ordered the Ebay 2100 carb swap. I have it installed and have the work far enough that I can start and let it idle. It really sounds a million times better! I need to do some more before a test drive though. I was wondering for those that have done how do you deal with you 4wd vaccuum? The...

My automatic transmission is leaking A LOT! I will go out there after after a few days of not driving the Jeep and there is a HUGE puddle of trans fluid on the ground. The trans is soaked and I can't really tell where it is coming from other then it is more on the drivers side. Is there a comon...

We got our first snow this weekend. It was about 6 inches or so. I took my Jeep out to some property our friends own. They let us hunt and fish there. We went to see where the deer where moving. Here are some pics of my fist off road adventure in my first Jeep!

Is that for sure a Ford Explorer rack on that black Jeep? I have a 65-70 pound fishing Kayak I need to figure out how to mount over my jeep to get to the lakes. Is the hard top stong enough to hold that kind of wieght?

Its was a broken power wire coming off the starter solenoid.

YAAAAYYYYYYY!!! Fixed it!!! I be rollin' with headlights again!!

Reading these diagrams I printed off the internet is making my head hurt. My factory service manual I ordered can't get here fast enough! Did I mention I hate wiring!

Ok I spent many hours tracking down wires today in this thing. I discovered that the wire I have that is getting hot is running from a splice just over the valve cover a bit towards the drivers side. There is roughly 7 or so yellow wires spliced together. Thsi wire however is red and goes from...

Somebody today told me I am missing my third brake light. I did not really think much about it 'till he mentioned it. Am I missing one from my pic?

Where is the relay located if it has one?

Well the odd thing is that its the section in the middle that is hot. The wires spliced on each end are not getting hot. It is also not fused to anything. Man I hate electrical. I worked for months on one of my MR2's trying to track down a problem. I am not really into that again lol

Its an '89 Sahara. 6 Cyl. Auto

I am really trying to be in love with this Wrangler but it is really starting to push my buttons. I went out there to go for a ride and discovered that my headlights and hazzards ar enot working. I changed all fuses and still nothing. They were working fine yesterday. The only thing I did was I...

I was wondering if a leaky automatic trans is common in these? I was working on my 89 and noticed a small puddle underneathe my jeep. It is trans fluid. Not a lot but still annoying.

Ok that makes sense. I guess it just need a good adjusting! Time to put it all back to gether and get to work on that I suppose!

Perhaps I am not right calling this part the oil sending unit. The guy at napa said it was called a "light switch" in his computer. But it deffinetly measures the oil in some way. It is round has two prongs for the gray plug and the other end is threaded and goes into another part on the block...

I am not sure. All I know is that if voltage does not get from one side of the gray connector to the other through this switch...or by using a jumper wire then there is no voltage to the choke. There will also be no power to the relay connection with the blue and white wire. I will go to NAPA...

Yep relays are all good. All splices in the harness are deffinetly factory made. It appears as if power goes to the first realy ( the one with the two orange wires) then down to the sending unit (two pronged with gray plug). The current appears to travel from the first relay down th orange...