Search results

I have a question for you on this. I need to pull my driver side rear Axle shaft out of my 03 Rubi. I have followed everything you posted but want to make sure I do this right. Once I remove the 4 retaining nut the axle shoud just slide out or do I need a slide hammer? Is there a retaining clip...

Jeepers that's a low price!!!!! Thanks for the info on the Pyramid I need to replace mine also.

Get a snorkel regardless of deep water or not, I was dumb and had a cold air kit on my, and hit a puddle that was deeper than I though, Sucked in a few liters of water and was dead. Fortunately friends pulled me out and I was able to pull my spark plugs and get back on the trail. Stick with...

Off topic 315's, Yes I am running stock axles and rims only added a 1 in aluminum spacer to give the turn clearance, I still get a slight rub on the control arms but that is not unti I am just about full lock.

Cheech are you asking if the Kicker CompVT 08CVT654 is a suitable replacement for the stock "Sub in the Console" or are you asking if you need a new Amp when you replace the stock sub with the Kicker? I have been looking into the same thing but had not found a suitable sub replacement.

Check out 4wheel parts, and look at the Pro-Comp shocks. Check the 4x4review site to ensure you get the right measurement. (google "how to measure shock absorbers" and you will see it. I can't post links yet.) The Pro-Comp shocks are decent quality for the right price, of course that is my...

That is about right for a price range, because the bulk of your cost is labor. Realize that the head gasket is under $30 depending on which kind you get. Speciality shops could cost more, or less if the are giving you a deal "because you are one of them", Chain garages are usually on the higher...

I have an 03 Rubicon with a 4.5" Rubicon Express lift, and 1" body lift running 315/75 r16s. It has been lifted for 5 years, and I finally have started hearing a noise out of the steering. At first I thought it was my tie rod ends needing grease, but after greasing every possible point of the...

I have had the same problem and the fix has always been related to the track bar. First time with a Rancho 4 inch on a 03 Rubicon, turned out that the bushing an modified mount point were shot. After upgrading to a Rubicon Express 4.5 lift the system was outstanding. Work great on an offroad and...