Search results

The gas gauge quit working so I bought a new one from Quadratech, make that the sending unit-float assembly. Anyway before I put the gas tank back in I hooked back up to fuel gauge. And what do you know, didnt register anything. I had a gallon of gas or so. So I pulled sending unit out...

Thanks for all of your replies guys! I am just going to hold off and get a new tub next year. This tub makes me wonder what it actually is. The floors have been replaced with just sheetmetal and angle iron. It has no toolbox under the seat. Hell even some of the frame mounts are not...

Thank you!

Will a 76 cj5 body tub fit on my 75 cj5 frame? I know the windshield frames are different, but if I use my 75 frame-windshield, will everything else work for me. Will this also work with my new softop? I found this body tub to rebuild and I am hoping to pull this off without having to get a...

Thanks!

Hey guys I have access to a 76 wagoneer with ps power disk brakes and 360 motor. Can I swap these axles to my 75 cj5? It has disk brakes so I am just wondering if it will work. Same with the power steering, steering column, and anything someone else thinks that I should do, etc. I really...

Dont know what was up for that radio either.:roll: I still don't know what to do about that rear spring. I can't run it like that. There is no suspension travel back there. Anybody have an idea of what to do?

Come on guys, someone has to know something!:???:

Does anyone have any comments or ideas as to why that rear shackle is like this? I think it is probally the spring too short? Need some ideas men!

It's been awhile since I posted last. Too much has been done to the Jeep, more than I wanted! The latest problem with the Jeep is the suspension. Rides like a tank. Crawled up the rear, and the shackle is horizontal. That'll jack things up a bit. I don't know much about what has been done. It...

New problem same Jeep-75 CJ5. I am running 220 on temp gauge running a 304. Radiator is new, heater core new, hoses new, and a motorad failsafe thermastat.. I put the thermastat in boiling water to check it-works. Flushed cooling system, and back flushed-good. Bottom radiator hose is not...

Yea I thought so too, after all that is what I was using. I even heated it up good. Tommorow is a new day.

I am in the process of putting upper and lower ball joints on my wifes jeep. 75 cj5. As I was pressing out the upper ball joint, the bottom blew out! So basically the O.D. of the ball joint is still in the steering knuckle, while the ball and socket sets on the bench! Any ideas on how...

Boy, that does look like a BIG PAIN in the rear. I know exactly where this spring goes. Thanks for all of your replies!!

Thanks, I will look forward to it!

Yea, it looks tight in there! The spring is already hooked on the top of the pedal arm. I need to know where on the bottom of the spring it connects to. There seems to be nothing to hook it to.

Hey guys, I got a 75 cj5. What or where does the spring on the clutch pedal hook to? I am talking about the long spring that is attached at the top of clutch arm under the dash-inside the jeep-and hangs down. I don't see anywhere to hook on -I assume the floor someplace? Thanks!

This is for wifes 75 cj5. 304ci, 3 speed. The heater core has 1/2" barbs, while the fitting at back of engine is 3/4" barb. I just wanted to know what fittings, size etc some other cj5 owners have on their rig. Thanks!

I am trying to hook up my heater core. The fittings are 1/2" for the core and 3/4" to engine and water pump. Did Jeep use connectors to reduce down to fit? I don't have anything to go by. Wasn't hooked up when I got it. Thanks!

I got home from the junkyard with a cadillac column. It has tilt and the telescoping feature. The indicator switch assembly will need to be replaced though. It feels a little funky. The column has a 1inch shaft. I haven't counted the splines yet, but I seem to remember 46 as the number...