Search results

Currently working 7 days a week so it 80 or it dont get done untill after spring break plus its the macanic my grandmother has been going to for 30 years plus they pick it up from my work and drop it off same day for the 80 so works in a pinch. And the caps were the crank bearing caps qq Sent...

I run the jeep with oil cap off frequently no excceve pressure in head Sent from my SM-G930T using Jeepz.com mobile app

Psi was as followed 6- 147 5- 146 4- 149 3- 148 2- 146 1- 147 The end caps i had to put a 1/4 turn to get to 80lbs toque on 3 of the bolts. 2 were on same cap so backed them all off of each cap after they turned. then went 40 each 70 each then 80 each as they called for. Might do a new...

Had a compression test done by a shop and test came back good with a cylinders within 4psi of each other. i have never opened up the motor and turned it to inspect pistons so thought it weird to get that hissing. also while under car i took a torque wrench down all the cap bolts. come to find...

Its the constant noise i worry about lol Sent from my SM-G930T using Jeepz.com mobile app

All lobes are about the same almost finger width was unable to get a mesureing tape in to get exact numbers Sent from my SM-G930T using Jeepz.com mobile app

Ok so an update on the noise im hearing Pulled oil pan off and started to inspect the pistons from under the truck as the skirts all look good and no noticable rocking during movement on the pistons themselfs. As i turn the crank around each cylinder hisses as pressure excapes. So bad rings...

A good way to catch the sound would be to mount a gopro or simular device under the car and drive around you can do it in several areas to see if you have none normal movement on anything Sent from my SM-G930T using Jeepz.com mobile app

Re: Intermitent to no spark 95 wrangler At least its an easy fix Sent from my SM-G930T using Jeepz.com mobile app

Ya can get a scrap parts jeep for 800 if needed lol Sent from my SM-G930T using Jeepz.com mobile app

Lol nice im near there i live in los fresnos and work on spi Sent from my SM-G930T using Jeepz.com mobile app

Update on noise: Replaced all push rods and lifters After doing so and watching to make sure of oil flow with cover off. my rough idel has all but disappeared. it is much smoother but am still getting a tapping noise but not as loud as before. So i am thinking you are right superj. Had my...

The noise is much more noticeable from this side of motor Sent from my SM-G930T using Jeepz.com mobile app

Sent from my SM-G930T using Jeepz.com mobile app

The noise was real quiet but has been getting louder when i first herd it i checked flywheel all bolts are tight the noise coming from pass sode of motor vid i took was driver side i will post a link for the pass side Sent from my SM-G930T using Jeepz.com mobile app

202k miles, only small leak in rms all others were fixed and just havent degreased engine and under carrage. What histry on truck you talking about? Everything i have replaced has been factory minus exhaust manifold i have had for 2 years. Oil rund 60 when cold 40 idel when hot and 60 when...

It would not let me share here so put it on youtube Sent from my SM-G930T using Jeepz.com mobile app

On my jeep i now am getting a light tapping/knocking sound. to me sounds like lifters or rockers can hear it on top but much more on bottom of motor. i have a video of it at idel and small rev up if i can upload here would like to here opinions. Dont want to pull head and replace things and it...

I got the spray an induced it intake i tryed to let it idel out but that didnt work. About 15m into my 30min drive in the morning it stoped smokeing but it was throwing plums of smoke. I was going down the highway just praying i didnt see any cops lmao Sent from my SM-G930T using Jeepz.com...

It hasnt gone into limp mode at all and just ran seafoam threw it to clean the valves and after 3h of running its smoking worse than ever im at a total loss now Sent from my SM-G930T using Jeepz.com mobile app