Search results

1048841 <TABLE BORDER=0 ALIGN=CENTER WIDTH=85%><TR><TD><font class="pn-sub">Quote:</font><HR></TD></TR><TR><TD><FONT class="pn-sub"><BLOCKQUOTE>Get a manual throttle, less than $10 from a bike shop. Put mine on the shifter to keep rpm's up when winching. Makes a good poor-mans cruise control...

1048842 tought choice... if it had to be a daily driver, and FJ-40.. but I'd be dreaming of a Unimog.[addsig]

1048905 you got a fan club and you didn't even know it [addsig]

1048974 a shaft with a cv joint on one end and a standard joint on the other... not sure what size yoke the rusty's kit gave you but the size of the cv joint will depend on that.[addsig]

1048975 providing you have the proper tools to deal with them the torx bolts are stronger and allow you to apply pressure to a larger surface when turning them[addsig]

1048982 the SOA will give about 5" more if you use new springs or lift springs. not sure why they would say not to use the 3" Body lift with a suspension left unless it was for liability reasons, a 3" body lift isn't the safest choice out there.[addsig]

1048996 what type of Jeep do you have? a YJ? there's are some more simplier ways then welding... 1: You can chop your current links in 1/2 and drill them, but instead of welding a tube to one side you drill both sides of the tube and use two pins which is how the Rubicon Express...

1048997 POR 15 isn't cheap, and it doesn't last long on it's own at all if it ever sees sun.. if you do go with the POR 15 get the top coat as well and use them both.[addsig]

1049012 <TABLE BORDER=0 ALIGN=CENTER WIDTH=85%><TR><TD><font class="pn-sub">Quote:</font><HR></TD></TR><TR><TD><FONT class="pn-sub"><BLOCKQUOTE>>> 2: Keep your sway bar link intact, cut the pin off the sway bar and drill it out and use a hitch pin through the newly made hole as a quick...

1041982 YJ's have a NP/NV231 t-case, a reverse rotation Dana 30 in the front, and a standard Dana 35 in the back. Your transmission is a Torque Flight 999. [addsig]

1041984 it depends on what other mods you have done, all it does is create a larger vacumn in the intake manifold to try and pull more air in. If you're current intake can't pass more air through then it currently is, then it wont help. Also if your exhaust can't pass more through it, then it...

1041985 I would also be interested.. do you have more then one set? I'd be interested in a set of 5.[addsig]

1041989 The D35 is the weak link. The transmission and t-case are very strong and have been used in a few v8 applications from the factory. I wouldn't worry about the front axle unless you're going over 35"s with the tires. As for replacing the D35, it depends on what your future plans...

1042002 I'll try and find out if he's still making them and get you his email address.[addsig]

1042102 there is a cleaner out there that works, someone showed it to me a long time ago so I don't remember what it was, might have been the Mopar stuff. It's mostly for light scratches that might occur if the windows rub each other while in storage, not sure if it will do much for deep...

1042103 31"s will fit on stock, for 35"s you'll want atleast 5.5" of lift, or with 4.5" of suspension lift and a 1" body lift you can fit 36"s, 37"s you might have some rubbing with 6", but some extended bump stops would fix that, or goto 7" of lift [addsig]

1043530 I'm having a hard time finding sites on this particular swap. I'm wondering if people encountered many problems with the rear drive shaft length? Getting the axle sometime in the next month, but don't have the money to throw in a smaller t-case, I already have an SYE.[addsig]

1044091 It's a Fram product.. so my first thoughts are it's of cheap design, but I haven't found anything bad on them yet.. anyone ever use one?[addsig]

1044895 Who here likes the end caps? I dunno why but I like them for some reason however everyone else thinks I'm crazy [addsig]

1044968 Stupid question I know, but don't blame me, I drive a TJ. do they all have one set size or did they change through the models? anyone know where to get housings for them? also anyone know where to get the housings for the marker lights underneath the headlights? Rather...