Search results

Welcome to jeepz.com forgot the designation of that carburetor , old age , please forgive me. But I believe it's a carter ? Possibly the BBD model ? It's Definatlt a feedback carb . Did you obtain the I.d. Numbers from the original carb when you ordered it ? Guessing it's already handed in for...

Welcome to jeepz.com the ticking sound you speak of may very well be associated with the fuel system . you posted the sound originates from the power distribution center . The fuel pump relay is located inside . With the ignition on and the PDC cover off , isolate which relay is sounding off ...

Agree with all the above . Spark should be determined if present and injector pulse confirmed using a noid light on an injector harness plug. but the problem seems to be more than that . A 1991 PCM won't work on a 1989. '91 and up is Chrysler and '90 and down is AMC . Two different engine...

I second that ! If an attempt is made to adjust lash on a power steering box , the minimum is poor steering ,'excess steering play and wander . The worst is destruction if too much play is taken out and the sector shaft binds with the worm gear . Hydraulics will eat the box up in a hurry ! Just...

Read your post a second time and a little confused over the part / sensor name. you posted you were working on the t-case but said the offending part was the CRANK CASE POSITION SENSOR ? Ok , to clarify I'm not misunderstanding for the benefit of the OP . The crankshaft position sensor ( CKP )...

thank you for your post brother . yes , there is credence to this as live date from scan and labscope have determined that oxygen sensors and cam and crankshaft sensors often cause drivability , stalling and no start issues because the sensors are OUT OF RANGE. We are fooled into believing the...

Your most welcome . Was hoping my mis-experience would be of service . Never discount yourself . Sometimes I think I'm not saving myself anything . But at today's labor $$ , and the fact that good techs who even care are a lost art and precious commodity.

Agree with all the above . hoping that one of the items replaced was the cause and you don't see any more symptoms . also , the PCM used on 1996 and later Cherokee , grand Cherokee and Wrangler with the three angle plug harness design is prone to problems and noted for it . The internal...

Can't speak with much experience for getting my hands on a 4.7 liter V8. Was supposed to work on correcting oil leaks on my dads '99 GC but the jeep changed hands soon after some work I did over the summer . Now my sister-in-law is beating on it. Hope she has enough sense to check the oil once...

Hello and welcome to jeepz.com I'm not actually familiar with that model year but it sounds like the security light is the light in question . If that is in fact the case , the key is supposed to be programmed to be recognized by the security system . Only the dealer or a qualified locksmith...

I find it interesting that you've started a thread by this name . I've had a nickname for myself that I coined sometime after I joined jeepz.com. And yes , that nickname is " thread killer " . I have found that many times after I've posted , either interest may have been lost or no conclusion...

Have read your posts with interest as I've crossed this bridge more than once recently. The only success I claim is my 1973 jeep cj5 258 I6. The jeeps engine was stuck but only from sitting , not from any internal damage . I was able to free it with pb blaster and time and a good yank from my...

I second this advice . Not only is it proper repair , but it is a safety concern . The cj5 ( and even the cj7 ) has had its share of safety complaint when driven by someone who wasn't being mindful of its short wheelbase and short width . These comcerns your experiencing and will others likely...

I'd like to offer an account from my own experience regarding the problem you are experiencing with your jeep . Over the summer , I slaved over a hot jeep , my dads 1999 jeep grand Cherokee . Although the '99 is a WJ platform , it shares similar front suspension components . In addition to rear...

Thank you sir ! I guess Donald j. Trump will have to do for now but I kind of take a shine to Trey Gowdey . I think he is what we need . I think he would be more in touch with us sportsman . Real honest guy and not afraid to speak the truth in a law abiding way .

As a union member I was expected to vote for RHC. I cast my vote for Donald j. Trump. Although we all feel differently about him , it will be our responsibility to stay the course with this administration this time if we are to get the change we really asked for and were due for . I couldn't...

Not that I've ever been a cj6 fan , I admit , they sure did slap on the cool factor , and heavy . This is one hot lookin' jeep . They really did a great job bringing back the retro look and keep it looking so CJ . I totally dig it ! Even with an auto trans .

I'll say . He made it look so easy . One wrong move and out come the recovery ropes . Give him credit too , didn't even bust a tail light .

Bummer . Yeah , the jeep's floor is tight on the firewall where it meets the floorboard . Either the floor access must be removed or the engine tilted out all the way which stresses the engine mounts . Either way , just increases the work load . Glad you'll be rolling soon ! Thanks for the pic's...

I would have to agree . Those angles violate every engineering law of physics known . Someone with too much money , too much time and too many spare parts just put it all to use . Good use or not is the question . Just wondering since its been so long since I had my hands on one , is that an...