Search results

Today I found that the shift linkage to trans in donor trans has a problem. When in park the jeep won't start unless I get under and wiggle it back and forth with my hand. I already tightened it and still no change. So I guess I have to swap those back out. Sent from my [device_name] using...

Alfred Hitchcock style driving. Sent from my [device_name] using Jeepz.com mobile app

Thank you I will check into that today I appreciate all the help Sent from my [device_name] using Jeepz.com mobile app

Thank you I will check that out today appreciate all the help. Sent from my [device_name] using Jeepz.com mobile app

Yesterday I filled the crack on the exhaust manifold with Muffler weld I let it set up today I was going to check it and see if it held or if I have to replace the whole manifold. Sent from my [device_name] using Jeepz.com mobile app

I had a feeling that one in the back of the block had to do with thermos gauge. I do appreciate all the help and advice. Sent from my [device_name] using Jeepz.com mobile app

Picked up the Hanes Manuel yesterday for $24 from oreillys. The shake is at1,250 rpm only a little bit now but more than it ever was. Soon as you get above 1,250 it is smooth sailing. Sent from my [device_name] using Jeepz.com mobile app

Just till I get the money up. Sent from my [device_name] using Jeepz.com mobile app

Very nice. I think I am going to use the old one that doesn't have a crack in it. Sent from my [device_name] using Jeepz.com mobile app

I changed the mounts when I put in the motor. I cleaned the tb. But I'm finding differences between motors. The one installed is a 92 motor. The one that came out was a 94. I'm having a hard time finding the coolant temp connector. The plug comes out of the drivers side of block but there is no...

So the engines in and vacuum leak is fixed. I now need to fix a new crack in the exhaust manifold at a weld joint and figure out why there is so much shake at 1.25 rpm. Sent from my [device_name] using Jeepz.com mobile app

So upon further inspection I found the pcv elbow was broken. I picked one up with carb cleaner and a Hanes Manuel. I looked up the vacuum diagrams for the i-6 and they don't even match up with the engine. So I'm going to do what I can in the rain today and cross my fingers. Sent from my...

Will check it all today. So far I've had to have a rental for a week longer then I was supposed to. Getting expensive. Really hoping I get this done soon. Sent from my [device_name] using Jeepz.com mobile app

Anybody have any ideas? Sent from my [device_name] using Jeepz.com mobile app

Got the jeep all back together. Started her up and had to replace crank position sensor. Now she isn't idling true. And when driving she loses power then will have a hard time slowing it's running idle. Sent from my [device_name] using Jeepz.com mobile app

Got a lot done today. Engine, trans, t-case, front and rear drivelines, cross member, exhaust, oil change, transmission fill up, radiator, fans, and coolant. No fire... Upon further inspection I found my crank sensor had stripped wire from plug. Picked up a new one from oreillys for $65 with...

Not the weather for working on the beast outside. Sent from my [device_name] using Jeepz.com mobile app

Unfortunately it is only 27° here right now and I messed up my lower back this weekend.buti head there's no rest for the wicked. Lol. Sent from my [device_name] using Jeepz.com mobile app

The aim is to get it started by this evening Sent from my [device_name] using Jeepz.com mobile app

End of day 3 Sent from my [device_name] using Jeepz.com mobile app