Search results

I've heard good things about something called 303 Aerospace. Anyone know what this stuff is or how it's used in auto care?

Thanks for the help and sorry it took so long to get back. The light went off but finally came back on again yesterday so I got it reread again...all 4 codes are the same...P0430. Vehicle has 305k miles and I'm not sure how long the cats been on it. I just got it a year ago at 280k. I go...

What's a good long lasting tire dressing? I used to use this stuff called Wipe New - Tires but it's since been discontinued. There was a process. First you soaped and scrub cleaned the tire, then let dry. Then you don a 3M chemical filter cartridge mask, because no joke this stuff was...

2011 Crown Vic here with 305k miles, and today my engine light comes on. Scan at the local Advanced comes up with 4 codes on the cat converter. Guy says I need to get something called Cataclean and run it through the gas tank to correct the problem. Is it worth doing this...will it make...

So my Mom drives a 2002 Ford Taurus that I believe has one of the Takata airbags that have been killing people. So far her car hasn't been recalled for the airbag, but I know this recall is being done piece meal as they can't do them all at once, and since the recall applies to the year...

I bought a 2011 Crown Vic with 300k miles 12 mos ago and I'm wondering how to approach servicing the timing belt. I know very little of it's past maintenance records other than what I've done with it this past year. Basically I'm wondering if I should go ahead and attempt to replace it now...

Thanks for the good info yall. A few follow up questions... I trust ya JPN but why no cleaner? I've had others advise to spray it all out, I really don't know one way or the other. Also got advice that I might have a limited slip diff but the clutches are worn out. I suppose I could write...

I have a '11 Crown Vic with 300k miles on it and my rear diff fluid looks like this... Been watching some utube vids on how to change this fluid out but after a visit to the local Advance store I've got some questions. Up til now, forums on the net have led me to believe that all former...

Thanks for the video, good stuff. After I took the gauges off I noticed one of the schrader valves was hissing, and now the system is down to 0 psi. So I believe a faulty valve has been the culprit all along. Now that the system is down I'm going to replace both valves, but my regular...

Hooked the gauges up and it seems like I've got a low refrigerant condition. Before turning the engine on both gauges read about 75. After starting the engine and setting the AC on max you could really tell the compressor was cycling fast. The needles cycled every 5-6 seconds...one going up...

When it's raining the fogging can happen about anytime. The a/c tends to be cooler when the vehicle is moving and gets less cool when it's sitting idling. As the engine was overheating last summer I replaced the whole fan unit with new and that solved the problem. So I'd imagine we can rule...

Thanks so much JPN and sorry it's been so long since I dropped this. Life got a little complicated for a while there. I know I'm a bit out of place here but these problems are going on with my '11 Crown Vic. I noticed you mentioned Jeep in your post so thought I'd say that again. Here's...

Have a '11 Crown Vic with 290k miles and I've been having a problem with the windows fogging up all the way around. The defrost seems to be working about half the time. On humid rainy days it'll work for say a half hour keeping the windows clear, then the windows will fog hard for 10-15...

Bought an '11 Vic with the 4.6L back in June and a few months back I tried to change out the plugs. All came out ok except for cyl 4 which only cranked out 1/4 turn. Had a shop take it out and they said they had to redo the threads. I've seen videos where you can remove a stuck plug by...

My knock sounds exactly like whats in the video where the guy is fixing his loose flexplate bolt. https://www.cherokeeforum.com/f51/ho...ocking-125547/ Is there any danger in running it like this for a few weeks? I've got a more pressing problem with my other car I'm trying to take care of...

96 XJ here, 180k 4.0. Recently I've had a repetitive knock sound show up. You don't hear it on a cold start but after it warms up there's a distinctive lower pitched knock with a frequency of about 10 times a second, at idle. Seems to be coming from the bottom of the car/engine as you can hear...

Found the leak at the front driver side corner of the intake manifold. Really wish it wasn't so cold out now. Any last advice on an inexpensive source for an OEM intake mainfold? Considering how much this car is driven I better stay away from after market.

Thanks for the advice JPN. I've also been advised that this may be a leaky intake manifold or gasket. Is there a test I can perform that confirms it's my intake manifold that's leaking before I start taking parts off?

My '11 Crown vic with 270k miles suddenly started running rough mostly at the lower end of the gears. By the time you got into o/d the whole car shook. Scan tool gives me P0307 cyl 7 misfire, and P0316 misfire upon startup. So I pull the coil on 7 to find a pool of burnt smelling coolant...

Thanks JP I'll check my wiring for anything loose. Elsewhere I've been advised to 'lubricate the latches with a penetrating grease, one that sprays in as an oil and then sets up as a grease.' Any advice on what kind of spray lube would work? Never heard of a kind that sprays in but sets up...